VEMS Home Products Documentation Wiki Webstore
WikiHome ProjectPage DocsPage UnderDevelopment MembersPage SiteIndex RecentChanges Preferences
History of MembersPage/PeepPaadam/PorscheIgnition
Older Newer
2014-07-31 07:09:47 . . . . catv-80-98-222-153.catv.broadband.hu [tdc delay value]
2014-07-30 11:29:08 . . . . catv-80-98-222-153.catv.broadband.hu [100-1 retested without camsync]
2006-11-10 14:39:51 . . . . MembersPage/PeepPaadam [Need overlapping dwell firmware, help with primary_trigger settings!]
2006-10-08 10:34:37 . . . . MembersPage/MarcellGal [cleanup; explained the 2 setup]
2006-10-08 09:39:19 . . . . MembersPage/PeepPaadam [Update! Car runs good now!]
2006-10-07 13:15:33 . . . . MembersPage/PeepPaadam [Answers added and question about config modifying.]
2006-10-07 13:08:54 . . . . MembersPage/PeepPaadam [Answers added]
2006-10-07 09:16:01 . . . . MembersPage/MarcellGal [change wiring back ? that does not make sense]
2006-10-07 08:57:28 . . . . MembersPage/MarcellGal [all 8 cyls have inj/ign/fuel power ?]
2006-10-06 11:52:09 . . . . MembersPage/PeepPaadam [Update (still not working good)]
2006-10-05 20:50:51 . . . . MembersPage/MarcellGal [proper configuration of h[2] for ign_dualout]
2006-10-05 06:27:36 . . . . MembersPage/PeepPaadam [Update and some more questions]
2006-10-05 01:07:26 . . . . MembersPage/MarcellGal [proposed ignch - cyl mapping for ign_dualout]
2006-10-04 11:30:52 . . . . MembersPage/PeepPaadam [Added basic info]
2006-10-04 09:43:51 . . . . MembersPage/MarcellGal [made it clear again that basic info is missing]
2006-10-04 06:41:23 . . . . MembersPage/PeepPaadam [Answers on ign. setup]
2006-10-03 16:48:31 . . . . MembersPage/MarcellGal [warn about useless information (almost none)]
2006-09-27 10:25:10 . . . . gw.jrnl.ut.ee [Ignition wiring and config description]

Changes by last author:

Added:
Primtrig: crankwheel is 100-1.
Changed:
I need to upgrade to overlapping dwell firmware, because when redlining (7000 rpm) it loses teeht occasionally near 6500rpm like Marcell predicted.

So, what I'd really need is someone who could point me in the right direction with the new primary trigger settings.

Wheel is 100-1 .

We retested the 100-1 without camsync setup (aka "m991") with 1.2.27 firmware in lab (using different starting positions for the pattern).

m991_syncup_only_spark_events.png

m991_syncup_only_spark_events_worst_syncup_pos.png

* injections and sparks (wasted spark) OK. Tested only upto 10000 RPM (other triggers, even auditrigger c270 is tested well beyond 10kRPM).

** some [files here, including a config with 100-1 trigger setup]

** if no better idea, set "first trigger_tooth" to 0 and "TDC after the trigger" to 70 deg ... Then strobe:

** strobe-lamp around 25 BTDC, not just around 10 BTDC. (strobing at 2 or more positions is always a good idea anyway, and strobing with realistic >=10 is better than at 0.25 BTDC ).

** not currently supported with cam-sync (an no near-future plans. Some older firmware might support it, or might not; Best to mount a different crankwheel if camsync needed).