Changes by last author:
Deleted:
| 1196 not working,gives trigger error with less pr trig error. |
| need help. |
|
This was originally auditrigger, but the
* camsync HALL was home-changed so that it deviates from factory specs: offsetted: not around the crankhome-VR any longer ** the 3d trigger input (normally used for exhaust cam) is enabled and used for this offsetted HALL signal, See pic on [VT motorsport/camshaft angle control] ** this special mode is actually enabled by enabling the 3d trigger input in config ** the sectrig-HALL input (internally) is pulled to GND (not to +5V because of cam-HALL inverter) so it allows every crankhome-VR pulse through (one per 135 primtrig pulse) ** all 3 triggers are independently seen in the [triggerlog found in the downloadable zip] See GenBoard/UnderDevelopment/FirmwareChanges 1.1.96 notes. Works perfectly * Just had to press update in VemsTune (for a firmware newer than VT, uptodate ini files are almost always needed). |