Changes by last author:
Changed:
| * what board version is this ? v3.x x= ? |
|
* the board is version 3.2
* AREF mod (just a short) * MegaTune 2.25 (used now and before) |
|
* What is MegaTune version ?
** manually test: with terminalprogram view-hex mode, (Manbyebye so it is not manual-command mode but megatune binary mode) "AAA", and look at offset 24,25 and 26,27 of the A command's reply (neglect the first reading) |
| Q: Is the MCP3208 fried? (I think not..) |
| * manually test: with terminalprogram view-hex mode, (Manbyebye so it is not manual-command mode but megatune binary mode) "AAA", and look at offset 24,25 and 26,27 of the A command's reply (neglect the first reading) |
| Q: Or is there something I have forgotten to configure that has changed? |
| The board currently runs 1.0.36 and I will upgrade to 1.0.73 in the coming days in hope that I can get it working again. Anyone else have an answer to why it stopped working with just a firmware upgrade? I will try the manual test described above if the firmware upgrade doesn't solve it |
|
Q: What happened to the egt_ variables ? (Here is the [config file])
Q: Only one remains! Does it work for both channels? After v3.1, the mcp3208 channels (4,5 IIRC) that belong to EGT1 and EGT2 were swapped. Maybe you had old firmware compiled with MCP3208_EGT1 ? Vital information! I have made the AREF modification by shorting with a piece of wire, and it works wonders for stability of analog inputs. |