-----

mostly notes to myself on pure megatune free-air calibration procedures from talking with Jorgen on IRC

key on, engine off

communications->mini terminal

Manmlp02mde02

it will come back 'Helo', enter key does nothing, this is normal.

mll

should display the o2 page. repeat until a value is displayed. o2 should be getting hot.

once an o2 is shown, if the value is lower than 20.9, close mini terminal with:

byebye

close mini terminal window, adjust wideband cal constant by increasing it 2 or 3 at a time, burn to ecu, back to mini terminal

Manmde00

The mde00 resets the wideband circuit

mlp02mde02

mll, check wideband numbers.. repeat until 20.9 is attained.