VEMS Home Products Documentation Wiki Webstore
WikiHome ProjectPage DocsPage UnderDevelopment MembersPage SiteIndex RecentChanges Preferences
History of MembersPage/JorgenKarlsson/MercedesCossy
Older Newer
2006-04-19 03:55:13 . . . . MembersPage/MarcellGal [what kind of charger is that? connected where ?]
2006-04-18 18:03:21 . . . . MembersPage/JorgenKarlsson [How much abuse can the ECU take.]

Changes by last author:

Changed:
As the car was now working nicely we decided to stirr it a bit by upgrading to 1.0.36 firmware and by removing the broken P259 chip. I also cleaned it up and tested the new Electrolube ULS UltraSolve cleaner and the Electrolube HPA conformal coating on the board. The HPA coating is easily washed off with the ULS cleaner.
As the car was now working nicely we decided to stirr it a bit by upgrading to 1.0.36 firmware and by removing the broken P259 chip. I also cleaned it up and tested the new Electrolube ULS UltraSolve cleaner and the Electrolube HPA (what?) conformal coating on the board. The HPA coating is easily washed off with the ULS cleaner.
Added:

Where was the charger connected ? To the battery ? Is there a chance that the peak voltage at the ECU supply was above 18V ? It normally shouldn't be higher than 15..16V.