Changes by last author:
Changed:
| hi, my project is an Alfasud Sprint competition car, to be used in hillclimbs and sprints. The engine is a 1712cc 16v boxer from an Alfa33 which has had extensive internal mods, with big valve heads, forged pistons, billet rods, racing cams etc. Target power is 200 bhp and 9000rpm. It is normally aspirated and breathes through 4 Jenvey 45mm tapered throttle bodies. I am almost convinced that a genboard is the way to go but am a bit worried that I might not be capable of getting it up and running as I have no electronic or programming experience and am in fact barely computer literate! Obviously the easiest solution would be to buy a plug and play unit but if I had wanted it easy I wouldn't have started modifying the Alfa engine in the first place but picked a Ford or Vauxhal instead, where I could have bought everything tried and tested off the shelf. With the Alfa everything has to be either custom made or adapted from other engines, which ties in nicely with the spirit of VEMS! Any comments, suggestions, or encouragement gratefully accepted before I take the plunge and order a board and all the other bits and bobs that I'll need. |
|
hi, my project is an Alfasud Sprint competition car, to be used in hillclimbs and sprints. The engine is
* 1712cc 4cyl 16v boxer from an Alfa33 which has had extensive internal mods ** with big valve heads ** forged pistons ** billet rods ** racing cams etc... Target power is 200 bhp and 9000rpm. It is normally aspirated and breathes through 4 Jenvey 45mm tapered throttle bodies. I am almost convinced that a genboard is the way to go but am a bit worried that I might not be capable of getting it up and running as I have no electronic or programming experience and am in fact barely computer literate! Obviously the easiest solution would be to buy a plug and play unit but if I had wanted it easy I wouldn't have started modifying the Alfa engine in the first place but picked a Ford or Vauxhal instead, where I could have bought everything tried and tested off the shelf. With the Alfa everything has to be either custom made or adapted from other engines, which ties in nicely with the spirit of VEMS! Any comments, suggestions, or encouragement gratefully accepted before I take the plunge and order a board and all the other bits and bobs that I'll need. ---- Trigger arrangement Do you have any information on crankwheel trigger ? VR / HALL ? How many teeth ? Is cam-trigger necessary / available ? If yes, what type ? |