VEMS Home Products Documentation Wiki Webstore
WikiHome ProjectPage DocsPage UnderDevelopment MembersPage SiteIndex RecentChanges Preferences
History of MembersPage/HansK/IdleSetup
Older Newer
2006-05-04 18:17:09 . . . . MembersPage/MarcellGal [idle active beforre trigger: can be perfect]
2006-05-02 19:49:21 . . . . HansK [re.]
2006-05-02 19:47:01 . . . . HansK [re..]
2006-05-02 16:03:39 . . . . MembersPage/MarcellGal [pullup needed to measure low-side output]
2006-05-01 19:16:41 . . . . HansK [Moved old Q.]
2006-04-26 13:00:11 . . . . HansK [Okay thanks..]
2006-04-25 15:45:02 . . . . MembersPage/MarcellGal [note: specfet needs flyback !]
2006-04-24 21:47:58 . . . . HansK [Idle-channel Q.]

Changes by last author:

Added:
Changed:
* Useing Step A "output" was always on (0% TSP of course) even before I started trigger-signal..
* Using Step A push-pull output: was always on (0% TSP of course) even before I started trigger-signal

** this can be normal, depending on your setup. Config determines behaviour, which might be according to intent