This [link] provides information for setting up the h[] table for the innight and injector masks

this [helps] with the tables

Turbo Setup

-----

System Definitions

* Trigger type: VR 60-2 setup std VW crank sensor

** Second Trigger avail cam 1 window hall sensor .. Not used

* Fuel Injection:

** Batch

** Stock 1.8T injectors 48 psi, 10-11ohm injectors

* Ignition type

** Wasted Spark

** or Coil on plug

* Oxygen Sensor

** WBO2 -- VW LSU4

* Map sensor type std

* Coolant sensor type bosch

* Intake Air Temp Sensor GM

-----

Startup stuff

* Fuel Pump control -- Not required for car using stock FP

* Priming Pulse -- using default

* Crank Pulse Definition -- using default

* Afterstart enrichment (choke) -- using default

* Warmup Definitions -- using default

* Fast idle -- using default

* IAC type and setup -- using default

------

Engine Running Definitions

* Rev limiter -- 8000 RPM redline

* accelerator pump based on rate of change of TPS -- using default

* deceleration fuel cut -- using default

* Temp Coolant turn on temp Not used using stock one in car

* Knock setup -- Still to check if boards are populated then calculate

* EGO configuration for WBO2 sensor -- Need source

* WBO2 configuration for WBO2 sensor -- Need source and calibrate

-----

Tuning Parameters

* VE learning

* LCD setup

* Keyboard Setup

-----

Advanced Options

* WOT switch at an RPM threshold -- Used for nitrous activation

* WOT switch

* RPM switch at RPM threshold used for shift light

* RPM switch output channel selector --I could use some help here