VEMS Home Products Documentation Wiki Webstore
WikiHome ProjectPage DocsPage UnderDevelopment MembersPage SiteIndex RecentChanges Preferences
History of MembersPage/Golf
Older Newer
2020-01-08 13:10:43 . . . . 212-40-64-222.pool.digikabel.hu [CAN notes ; data content URL reference]
2020-01-07 15:18:53 . . . . edunat1.fer.hr [r32 trigger]
2020-01-07 01:49:27 . . . . adsl-dyn240.78-99-197.t-com.sk [Adding ECU specifications]
2019-11-21 10:35:02 . . . . 212-40-70-124.pool.digikabel.hu [reference to page with CAN-ID and data-content]
2019-11-20 22:13:05 . . . . bband-dyn197.178-40-189.t-com.sk [GCU CAN info]

Changes by last author:

Changed:
B) from GCU to ECU:

- driven gear

- upshift request (to perform gear cut)

- downshift request (to perform blip)

- output speed

- trans temperature

B) from GCU to ECU (any specific CAN-ID and exact data content ?):

* driven gear

* upshift request (to perform gear cut)

* downshift request (to perform blip)

* output speed

* trans temperature

** If VEMS ECU should receive some data from the CAN-bus CAN-frames, that needs to be specified (CAN-IDs, data content).

Changed:
My questions are: Can i did this with ecu ordered with 2 serial ports and your AIM to CAN adapter? If i understand it right, CAN adapter must be programmed before purchasing. Can you please tell me if some of pdedefined dash CAN protocols (for BMW or Audi) can provide data which GCU needs? Or can you please make for us a new protocol for GCU? Or can you send me an existing CAN protocol documentation where HTG can find datas which they need?

Please help me if you can. It is possible to easy connect this GCU to Ecumaster ecus, but i really love Vems and want to use it for this car instead of ecumaster. Maybe this threat also will help another customers which wants to use Vems with DSG gearboxes. HTG-Tuning are really friendly and innovative company which looks like someone who wants to make a new cooperations. Since dsg geafboxes are very popular now, i think here is the chance to open new markets and find new customers for Vems ecus.

My questions are: Can i did this with ecu ordered with 2 serial ports and your AIM to CAN adapter? If i understand it right, CAN adapter must be programmed before purchasing. Can you please tell me if some of pdedefined dash CAN protocols (for BMW or Audi) can provide data which GCU needs?

* the AIM protocol has the data, see AimCanBusMessages

** so HTG can find datas which they need?

* The aim2can module also sends data to VEMS ECU, notably wheelspeed and analog channels. If VEMS ECU should receive some data from the CAN-bus CAN-frames, that needs to be specified (CAN-IDs, data content).

Maybe this thread also will help another customers which wants to use VEMS with DSG gearboxes. HTG-Tuning are really friendly and innovative company which looks like someone who wants to make a new cooperations. Since dsg geafboxes are very popular now, i think here is the chance to open new markets and find new customers for Vems ecus.