History of MembersPage/DaveBrul/CoilSaturation
Older Newer
2010-11-02 17:43:03 . . . . ip565f80fb.direct-adsl.nl [removed]
2006-03-16 04:43:08 . . . . MembersPage/DaveBrul [reformat]


Changes by last author:

Deleted:
Coil saturation measurements
Deleted:

After a lot off speculation about my coils dwell time i decided it was time to put the theory to the test. First i measured the coil-packs primairy resistance: both coils have 0.9 Ohm pri.

After that i measured the voltage across the coil- and GND (using the wire from v3 to coil als shunt). Surprising results!

Coil saturation time turned out to be ~9.8 mS, with a supplied dwell period of 10.4 mS. Battery voltage was 14.63 V [Scopeshot of the experiment]

How can this be ???

Well as it turns out modern coils are designed to almost never saturate, the above experiment coild have killed the coil.

Therefore i strongly suggest not to try the above experiment with modern type (below 3 Ohm primairy resistance) coils

See also:

* DummyIgnition page for tips how to safely determane coil dwell values.

* [page that inspired me to try it in the first place]

----

Back to: MembersPage/DaveBrul