VEMS Home Products Documentation Wiki Webstore
WikiHome ProjectPage DocsPage UnderDevelopment MembersPage SiteIndex RecentChanges Preferences
History of MembersPage/DanaScott/GenBd
Older Newer
2006-03-15 21:33:08 . . . . MembersPage/MarcellGal [powerflyback note]
2006-03-15 04:59:24 . . . . MembersPage/DanaScott [flyback schem?]
2006-03-13 03:28:24 . . . . MembersPage/DanaScott [Version of OS for upload.bat failure]
2006-03-12 19:30:02 . . . . MembersPage/MarcellGal [calc for 20k pullup and other notes]
2006-03-11 05:18:27 . . . . MembersPage/DanaScott [Problem w/ upload-firmware.bat]
2006-03-09 19:30:03 . . . . MembersPage/MarcellGal [therm calibration notes]
2006-03-09 04:12:45 . . . . MembersPage/DanaScott [Notes- Having trouble making air and cltfactor tables]
2006-03-03 19:17:28 . . . . 206-15-138-128.dialup.ziplink.net [notes update]
2006-03-03 09:35:05 . . . . MembersPage/MarcellGal [is LCD4x16 the only my_make change you need ?]
2006-03-03 05:39:13 . . . . MembersPage/DanaScott [update log]
2006-03-02 21:31:46 . . . . MembersPage/DanaScott [noted missing timing.c in 1.0.30]
2004-10-10 08:42:12 . . . . MembersPage/MarcellGal ["shutting off below certain RPM already there"]

Changes by last author:

Changed:
Mar-14-06 Where can I find a schematic for the PowerFlyback?

The GenBoard/Manual/PowerFlyback is effectively a high current diode, with a voltage drop of 5 diodes (appr. 4V). The cathode side connected to the injector-common (switched +12V) signal. The anode side to the onboard flyback rail. (note: which side EC36pin23 is connected depends on if the flyback board is inside the ECM box or outside).