Changes by last author:
Changed:
|
17.2.2008
After long time here again: VEMS motronic55 for Audi ADU engine with 400 kPa Map onboard |
| VEMS motronic55 for Audi ADU engine with 400 kPa Map onboard |
|
iring for WB02 (flying loom with SSC-male)
SSC female <-> WBO2 connector cable (other end with crimped pins but connector unattached in order to get it through firewall) |
|
----
Motronic ECU extra connectors * Follow VemsAudiAan during install (measuring and uploading steps) * it refers to MembersPage/TeppoKalske page bottom: AAN ECU extra connector pins: (no custom preference, so default is used) WBO2 on SSC5 male standard - applies to audi AAN and 3B (also to BMW): *pin1 nernst,WBO2 pin 1 *pin2 WBO2 pin 3 (use a 5A fuse from +12V supply wire) *pin3 heater(-),WBO2 pin 4 *pin4 pump(-),WBO2 pin 5 *pin5 pump(+),WBO2 pin 6 SSC6 feemale *pin1 mcp3208 pin6,ch5 *pin2 mcp3208 pin7,ch6 *pin3 mcp3208 pin8,ch7 *pin4 EC36 pin 34 (power out) *pin5 EC36 pin 36 (power out) *pin6 GND |