VEMS Home Products Documentation Wiki Webstore
WikiHome ProjectPage DocsPage UnderDevelopment MembersPage SiteIndex RecentChanges Preferences
History of MembersPage/BillHart/ProblemHistory
Older Newer
2006-02-25 20:27:29 . . . . adsl-11-48-107.mia.bellsouth.net [Housekeeping]
2006-02-25 20:26:26 . . . . 65.11.48.107 [Housekeeping]
2006-02-03 09:11:28 . . . . MembersPage/MarcellGal [another_trigger_tooth has little significance with 1cyl. Keep it out of the way]
2006-01-31 20:16:08 . . . . MembersPage/BillHart [I259 and P259 Duh!!!!]
2006-01-24 21:41:07 . . . . MembersPage/BillHart [Housekeeping]
2006-01-22 09:43:18 . . . . MembersPage/BillHart [housekeeping]
2006-01-21 09:02:59 . . . . MembersPage/BillHart [housekeeping]
2006-01-19 04:18:37 . . . . MembersPage/BillHart [added wikiadvert]
2006-01-18 23:32:16 . . . . MembersPage/BillHart

Changes by last author:

Added:
* Is it possible to move the injector firing point within the 720 degree cycle for a primary/no secondary trigger system?

** no. Actually, 720 degree cycle does not exist (as far as the ECM is concerned - the valves know about the 720 degrees cycle of course) without camsync. Only a 360 degree cycle exists. It would be possible by analizing the MAP signal or the RPM angular speed variations, but it's not implemented. Thank You Marcell, Bill Hart