Changes by last author:
Added:
Some experiments was done with denso/autronic charge temperature estimation model. Same model used at old Denso stock ecu.$FlgChr1$FlgChr> temp charge table was addeed, it is 16x14 for easy edit both tables (with VE table) simultaneously by Applet, when autotune in progress.$FlgChr2$FlgChr> If table value = 0, charge temp = clt.$FlgChr3$FlgChr> If table value = 1, chatge temp = mat.$FlgChr4$FlgChr> Mapcorr and matcorr tables excluded.$FlgChr5$FlgChr> MT show estimated charge temperature and actual airdensity correction.
$FlgChr6$FlgChr> Applet fills charge table with sensitive values by some rules (simple gain/interpolation map*ve values with top/bottom limits), but it is not configurable for a while, i set config rules before applet compiling. Of cource it does not work with alpha-N, i use SD at my car.$FlgChr7$FlgChr> $FlgChr8$FlgChr> You can try this model with my experimental firmware. You need retune entire VE table.$FlgChr9$FlgChr> My first table, but now i use 30% at left-bottom.$FlgChr10$FlgChr> 
|