Changes by last author:
Added:
|
Historical values for older rescue kits - see GenBoard/VerThree/RescueKit for general info and recent version
* diodes for highZ GenBoard/Manual/DDFlyback: 8 pieces of 20V or 6.8V (text on top reads "332 6V8") SMB transient protection diodes that are only needed for high voltage flyback. These MUST NOT be used with PWMing configured unless they are mounted according to the lowZ configuration (reverse polarity compared to highZ - just see the drawings). We use low voltage flyback for all setups now, the improved injector opening model makes this possible. * LM1815M 1 piece is onboard since v3.1 on primary trigger place, but it can easily be wired to secondary trigger. 2nd LM1815 is not included by default, it is optional, see WebShop. ---- Old rescue 1 kit - before v0.06 * 15..20 pieces 1002 (10k) * 10..16x102 (1k) IGBT gate resistors are in * 2x183 (18k) * 5x474 (470k) * 3x105 (1M) * 3x472 * (4,7k) * 2x165 (1,6M) * 2x101 (100) * 2x473 (47k) * 2x562 (5,6k) * 2x222 (2,2k), * 3x163 (16k) * 2x203 (20k) * 1x333 (33k) * 2x272 (2,7k) 0,5% resistors (the 5% are within 0.5% in practice too): * 2x 5100 (510) * 10..15x1003 (100k) * 4x2703 (270k) * 2x2401 (2,4k) * 2x7502 (75k) * 2x3902 (39k) ---- old Rescue2 v0.02: The packs posted on Apr 9..10 (Mika P., Dana S., Seppo R., Daniel B., Kevin M.) have the following: 8*220n 0805 50V trans 4*1u 0805 25V trans 4*2.2u 0805 16V trans (taller than the 1u) 4*100n 0805 50V paper 5*10n 0805 50V paper 2*10u 1210 35V trans (huuuge!!) 2*330n 0805 50V trans 2*1n 0805 50V paper 1*10u 1206 10V trans TODO: revise the values for later kits. If you miss other values, specify here: ---- old rescue2 v0.03: (only 3*1u 0805 and 1n,330n missing from v0.02) 5*10n 0805 50V paper 4*100n 0805 50V paper 8*220n 0805 50V trans 3*1u 0805 25V trans 4*2.2u 0805 16V trans (taller than the 1u) 2*10u 1210 35V trans (huuuge!!) 1*10u 1206 10V trans ---- old rescue2 v0.04: (1n added back, 2.2u went down to 2, since only recommended for the 5V stuff anyway, 16V has too little margin for 12V) 2*1n 0805 50V paper 5*10n 0805 50V paper 4*100n 0805 50V paper 8*220n 0805 50V trans 3*1u 0805 25V trans (tall) 2*2.2u 0805 16V trans (tall) 2*10u 1210 35V trans (huuuge!!) 1*10u 1206 10V trans ---- old rescue2 v0.05: main improvement is that 5V1 zener moved to rescue2 kit, since it's hard to tell from normal (nonzener) LL4189 diode. 3*1n 0805 50V paper 5*10n 0805 50V paper 4*100n 0805 50V paper 8*220n 0805 50V trans 3*1u 0805 25V trans (tall) 2*2.2u 0805 16V trans (tall) 2*10u 1210 35V trans (huuuge!!) 1*10u 1206 10V trans 2*1u 1206 50V trans 2*5V1 SOD80 zener diode (not capacitor) ---- See also |