Changes by last author:
Changed:
| Actually, maybe a separate (that has no wbo2 controller inside) round firmware that polls v3.x and displays lambda and EGT. |
| AfreshTiny/AimDisplay (in WebShop: [1]) |
|
* Is it OK if it uses up the RS232 port ?
** That is, while you're tweaking v3.x with megatune, the round is unhooked (and does not show real values). *** This is a great compliment to the v3.3 ecu. I would like to have this feature as soon as possible to offer as an option. I have extra wires ran into the cabin for this reason. If you need a beta test, let me know/ KevinBlack ****Anybody waht to help work on this? I could have easily sold 5 gauges by now, and probably will sell more ECU when comm to round is done ---- Update? * Is Comm to Round finally finished? I found this on the webstore: Display Only Round |
|
Actually, standard round can also display AIM (with sufficient recent firmware), but the display-only is cheaper and has less cables.
* Uses the RS232 port. Disconnect round, while you're tweaking v3.x with megatune (v3 will stop sending AIM stream when it senses megatune is polling it) |
|
<<<Looks like a round device, but only useful for displaying data received via RS232 input port. It cannot measure by itself (except internal temperature) : without WBO2 connector (without LSU4 sensor), without EGT connector and without main connector (no analog input, no RPM input, no analog output).
It only has supply and RS232 connector. It receives data from genboard v3 (or other AIM compatible sender device or PC). Several devices can receive the same AIM stream. The aim stream contains several "channels", and each round can display 2 channels, with configurable conversion (adjustable offset, multiplier and dot position allows displayed units, eg. bar, kPa or PSI, Fahrenheit or Celsius, etc>>> |
| Other functions |
| Other functions not available on connector on the display-only HW (it is literally display-only) |