Changes by last author:
Added:
Intuitive from VemsTune (Tools / firmware webtool) |
* But display modes changed (there are 8 display-mode "slots")
** these MUST be set up after firmware upgrade. Without setting the display mode slots properly, the display will show unintended values or blank. ** setting these is automagical in VemsTune, but manual in megatune. VemsTune is recommended (also works with the AIM version now). |
* But display modes might change (if upgraded from ancient fw: there are 8 display-mode "slots" now)
** configure [display] after firmware upgrade. Without setting the display mode slots properly, the display might show unintended values or [peak and hold] values or blank (practical for night driving on long journeys). ** setting these might be automagical in VemsTune, but manual in megatune (not supported anyway). VemsTune is recommended (also works with the AIM version). |