### ## ## ##### ## ## ## ## ######
##### # #### # #####
## ## ###### ###### ## ## ## ##
## ## ## ## #### ## ## ## ##
##### ## ## ## ## ## ## ## ##
IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now. Visit Preferences to set your user name Summary of change: '''Developer corner: find a good way for networking the AVR (mega88) boards''' While the big ARM guys ( VemsFrontier/ArmEfi and IonSense ) will work nice with CAN, CAN is not feasible for ATMEGA88. ATMEGA88 has an UART (128 also, except it has 2): * FBUS point-2-point for very short distance * RS232 point-2-point for short distance * RS485 bus for upto 32 nodes network. The only solution While FBUS requires no transceivers, the RS232 and RS485 transceivers are the same cost (very cheap) and availability. '''Neither of the above can be used to talk to most notebooks directly: since majority of notebooks have neither of these ports, only USB'''. Fortunately, [http://zone.ni.com/devzone/conceptd.nsf/webmain/F9F58CBF78A3D1ED86256C06007AF286?opendocument&node=dz00000_us bridging ]either of these to USB is simple and cheap. It is normally just a "cable" with some circuitry inside. RS232 and FBUS not only needs bridging to notebook, but also needs a HUB when more than 2 nodes are used. * symmetric drive for twisted pair preferred ** ST490A or other driver ** http://focus.ti.com/docs/prod/folders/print/sn65176b.html makes symmetric (shielded pair) serial bus possible ** you can experiment with v3 midOPA if you have no other choice * physical ring * physical bus: with collision detection or sg. like a token-ring * physical star: a board with many serial connections The '''RS-485''' is basically an update of the RS-422 specified for multipoint buses to be constructed. This standard meets and improves all the requirements of the RS-422 allowing, in addition, up to 32 drivers and 32 receivers can be connected to a single bus. [http://www.st.com/stonline/prodpres/standard/interfc/rs42285.htm ST] site. TI has many cost efficient transceivers. Optional: Add document to category: Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.