####   
 ##  ##  
 ######  
 ##      
  ####   
         

         
         
  ####   
 ##  ##  
 ######  
 ##      
  ####   
         

         
|\     /|
| )   ( |
| (___) |
|  ___  |
| (   ) |
| )   ( |
|/     \|
         

 _    _ 
( )  ( )
`\`\/'/'
  >  <  
 /'/\`\ 
(_)  (_)
        
        

         
  #### # 
 ##  ##  
 ##  ##  
 ##  ##  
 ##  ##  
  #####  
     ### 

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
The following resources have been obtained while installing VEMS on Toyota 4A-GE 16V & 20V engines. VehicleFitment/Toyota/Injectors VehicleFitment/Toyota/Triggers VehicleFitment/Toyota/Sensors VehicleFitment/Toyota/IdleAirController ----- After the previous work using pull-down resistors we moved onto the suggested 10k->12V pull-up resistors and the addition of a 220nF cap on top of C40. Still not good, the latest trigger log shows some strange missing tooth issues: http://vems.hu/www.vems.co.uk/VEMSTrigger/4AGETrigger3.txt ----- Toyota 24+4 Trace: http://vems.hu/www.vems.co.uk/VEMSTrigger/Toyota24+4.png Recorded as a Wav file and displayed in Audacity trace. Testing on the bench with: Recorded trigger as a wav works okay, testing distributor driven by a motor works fine. Testing with the trigger in the car through the loom does not give an RPM reading. '''Config & Tables''' http://vems.hu/www.vems.co.uk/VEMSTrigger/config.txt http://vems.hu/www.vems.co.uk/VEMSTrigger/tables.txt '''Connection Details''' The Ne (24tooth) trigger is connected to Trig1, the G1 (4 tooth) trigger is connected to Trig2. The G- combined ground connects to the common grounds. Two 270Ohm resistors pull the signal down to ground. '''Trigger Logs''' Initial test: http://vems.hu/www.vems.co.uk/VEMSTrigger/24+4InCarTrig.txt Test with the Ne and G1 trigger inputs changed over Ge to primary trigger, Ne to secondary trigger - we were out of clues so we thought we'd try it... http://vems.hu/www.vems.co.uk/VEMSTrigger/24+4AfterSwapTrig.txt Changing back to the correct trigger connections but removing the pull-down resistors. http://vems.hu/www.vems.co.uk/VEMSTrigger/24+4FinalMiseryTrig.txt A log from the bench test http://vems.hu/www.vems.co.uk/VEMSTrigger/24+4BenchLog.txt The owner of the car has produced a spreadsheet to try and analyse the trigger logs: http://vems.hu/www.vems.co.uk/VEMSTrigger/24+4waveformsgraphed.xls Toyota 24+4 Distributor: http://i81.photobucket.com/albums/j209/JMR_AW11/Ign6.jpg '''#10''' is the injector signal - indicating 1 injection event every two ignition events. Will this work with a divider of 2 to ensure that we get a batch injection event every second ignition event?
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.