_______ 
(_____  )
     /'/'
   /'/'  
 /'/'___ 
(_______)
         
         

 ___   
(  _`\ 
| (_(_)
`\__ \ 
( )_) |
`\____)
       
       

 __     __
 \ \   / /
  \ \_/ / 
   \   /  
    | |   
    |_|   
          
          

 _       _ 
( )  _  ( )
| | ( ) | |
| | | | | |
| (_/ \_) |
`\___x___/'
           
           

   ___  
  / _ \ 
 | | | |
 | |_| |
  \___/ 
        

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
This page tries to describe how to connect V3 with VemsTune via wireless TCP. http://www.vems.hu/files/pacsa/tplink-v3/tplink-v3.jpg '''Router setup''' # Need a wireless router with usb host and openwrt. ## Hardware: [https://www.epointsystem.org/trac/vending_machine/wiki/WR1043ND TP-Link TL-WR1043ND] https://www.epointsystem.org/trac/vending_machine/attachment/wiki/WR1043ND/wr1043nd.jpg?format=raw # Upgrade it to openwrt ## Openwrt installation: https://www.epointsystem.org/trac/vending_machine/wiki/HotSpotInstallation#InstructionsforTP-LinkTL-WR1043ND # open a browser and try open the admin page. # install packages: go System/software menu (of course the router needs internet connection to acomplish this step) ## kmod-usb-serial-pl2303 (if you have another vendor like FTDI try to find appropriate driver for it) ## kmod-usb2 ## ser2net #ssh to to the router and try to plug the usb-rs232 cable #after dmesg should see something like this: " ## usb 1-1: new full speed USB device using ar71xx-ehci and address 3 ## usb 1-1: configuration #1 chosen from 1 choice ## pl2303 1-1:1.0: pl2303 converter detected ## usb 1-1: pl2303 converter now attached to ttyUSB0" # open: /etc/ser2net.conf add the following line to end of the file ## 5678:raw:0:/dev/ttyUSB0:19200 # start ser2net: ser2net '''VemsTune setup''' #Preferences/ECU Communication ## select tcp: and write the correct IP:PORT in my case 192.168.1.3:5678 press detect Enjoy your wireless V3. ---- I have tested this method with an Asus WL-500pP v2 router OpenWrt backfire 10.3 version, and with Pl-2303 usb serial converter succesfully. Installed packages: ##kmod-usb-ohci ##kmod-usb-serial-pl2303 ##ser2net The vemstune works fine with tcp/ip connection but the communication is slower than native serial or usb-serial converter (19200baud). I have made some test: With wired connection the main overview group refresh about 17 Hz, and the calc model refresh more than 22 Hz. With wifi-connection tha main page below 10 Hz but calc model page sometimes go up to 22 Hz sometimes go to 3 Hz. Interesting...
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.