_   __
| | / /
| |/ / 
|    \ 
| |\  \
\_| \_/
       
       

         
         
  ####   
 ##  ##  
 ######  
 ##      
  #####  
         

  ____  
 |  _ \ 
 | |_) |
 |  _ < 
 |_| \_\
        

 _______ 
(  ___  )
| (   ) |
| |   | |
| |   | |
| |   | |
| (___) |
(_______)
         

 _    _ 
( )  ( )
`\`\/'/'
  >  <  
 /'/\`\ 
(_)  (_)
        
        

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
Use your pages and common pages for maximum benefit * You are not restricted to your own pages: People are encouraged to ask questions on the relevant pages ( eg. look for flyback on SiteIndex when it's flyback related issue and just point to their own subpage (of the project's relevant subsystem) for reference if necessary. This way others might reuse your experience easily, without going through 100+ member-pages. Also, GenBoard/Manual writers merge the settled recommendations and findings into the manual. They can hardly do this when the problem gets discussed on a memberpage. Naturally, when you get the answer, it is recommended to merge the interesting part to your project subpage (of the relevant subsystem). * The project pages should be kept uptodate with known stuff, tested things, TODO-s, open questions etc... organized thematically into sections and not chronologically (according to date). Yes, delete any old stuff and answered questions from the project page: just keep the answer, fit it to the relevant section. Don't expect others to know the cylinder count and other details of KLX-DME16-8ZR engine. You can significantly decrease your chance to receive answers by neglecting a few basic details about your engine (eg. cylcount). Provide any trigger info if possible: eg. pictures and description of connectors and units, any measurement if you are just investigating the factory trigger. * If you don't feel good about deleting old info, move them to a separate history page also under MembersPage/FirstnameLastname/... (anyone helping will avoid that page, as thematical organization is much more efficient to converge to a solution) Not too useful as history is available anyway. But in any case: don't let old, chronological info clutter up your uptodate project page! * After you get the engine running, don't forget to update your page(s) to show this. Many users forget this step and leave their pages with the problems even after solved (resulting in many pages listing problems instead of the successes). Why care when the engine runs ? Please do. The Members Make your own introduction and project page(s) MembersPage/BrendanBlessing Turbo 3Rotor RX7 MembersPage/TorokHimer - BMW 325 MembersPage/QuincyStraker - Suzuki Gsxr-1100 Turbo(T3/T4) MembersPage/BorisRieken - Want to install Vems on Opel/Vauxhall C20NE engine with turbo. MembersPage/DavidBlades - installed GenBoard on a TVR Griffith 500 (and thinking about a Subaru Impreza turbo). one of the best project documentations: documenting everything he's got working and also things he needs help on (not empty questions but detailed what he'd like to achieve and what he's done so far). Split to pages and organized well (thematically, not chronologically). MembersPage/FrankKatzenberger - Site Admin MembersPage/MichaelKristensen - Developer, owner of the first MSAVR MembersPage/MarcellGal - organized groupbuy, group manufacture, programmer and HW development, controls 4cyl 16V NA (GM-Daewoo-Opel) engine (60-2 crankwheel, wasted spark) with variable intake MembersPage/MarcellGal/EngineSwap MembersPage/JoeBialy - talk about yourself MembersPage/JimSantoro - talk about yourself MembersPage/SteveHendo – VW aircooled + Genboard v3.3 Please help with basic questions. MembersPage/JasonRussell - Developer - Web store, business processes, US East Coast Distributor (1988 RX7 Turbo) MembersPage/KristsMezgals - Planning to use Genboard for Audi S4 2.2T AAN fuel injection and ignition MembersPage/DanaScott - Sometimes developer, using Genboard for 2.3L Turbo Ford MembersPage/DaveBrul - Tester and part-time developer, turbocharging his 1.9 16v peugeot engine MembersPage/JorgenKarlsson - Developer of AfreshBoard MembersPage/ChrisGerhardt - Genboard V3.1 Installed and running on Turbocharged, 408 cid, MPEFI, in Pro Street S-10 Pickup. MembersPage/GrmRacer - Doing racing on the really cheap.. You try building a racecar for less than $2004.00 MembersPage/NicholasFranks - Trying out this DIY ign + inj system to put on a VW MembersPage/DorianBeli - Newbie - Planning to turbocharge my Opel Vectra A 2.0 16v / Vauxhall Cavalier GSI with the help of MegasquirtAVR MembersPage/PhatBob - Rob Humphris, Project documentation and UK Agent. Author of the User Guide: MembersPage/PhatBob/UserGuide MembersPage/EmilLarsson - Working mostly on testing and megatune profile. Also doing installs for customers. MembersPage/TonciLoncar - I have Opel Kadett D, from 1983, with 2.0, 16V, DOHC, turbo engine from Calibra turbo (c20let) that is controled by Vems 3.1. MembersPage/JohanRius - Newbie - VW 1.8L 16V under conversion from K-Jet to EFI (MSAVR) MembersPage/RichardOhran - Newbie - Currently running Holley Commander 950 on a 69 Firebird MembersPage/DavidGregory - Am adapting MSAVR to an odd-fire v-twin Ducati Monster MembersPage/BrianMichalk - studying aircraft application MembersPage/MikeSullivan - 94 Rinker 236 w/Mercruiser 7.4L Bravo1, '86 Honda 700cc VFR, 12hp Briggs Stratton powered Lawn Tractor. MembersPage/Fero - AVR powered Mazda 323F. MembersPage/MathiasCardevik - Volvo 242 16v turbo soon with V3, hopefully MembersPage/MarkBeer - I have a 1976 Chevette HR rally car which is crying out for proper induction and ignition. MembersPage/MiskaPeippo - VEMS on Audi S6 (AAN) MembersPage/DavidHelland - I am adapting MSAVR to air cooled VW MembersPage/PetrPodrazsky - I want implement MSAVR on Skoda engine MembersPage/JasonVoytilla - VEMS v2 on 1984 VW Rabbit GTI with EDIS & VEMS v3 on 1990 BMW 325i E30 with S52 Turbo MembersPage/AmandaWynne - 82 RX7 13B Mild Port, currently carburreted, going dual TBI MembersPage/SeppoRepo - VEMS 3.0 Peugeot 309 2.1 Litre fully ported with wildest Street Cam from CatCams? MembersPage/VinceGonor - Putting AVR on an 86 Isuzu Trooper 4cyl. Goals: lean burn, turbo and water injection MembersPage/JasonNorris - 93 Vette LT1, 76 Jag XJS w/383, 71 Chevy PU w/Olds 455. MembersPage/JonasAndersson - Peugeot309GTI '87 running on msavr genboard2. MembersPage/MattiasCalleberg - Golf Turbo currently With MS2.2, Hopfully in a not so distant future Genboard3.X ionic style. MembersPage/JohanMo - Getting VEMS for my Saab 9000T MembersPage/TobiasGogolin - Jeep CJ7 4.2l-I6 - Developing the GoBox a Ultra Low Consumption / Renewable Energy specialized Motorcontroller type of GenBoard MembersPage/Helmut - want to run my car on tapwater (Hydrogen On Demand) MembersPage/MichaelRichards - Mazda 323GT-R & Subaru Legacy Turbo. Either or both destined to be VEMS'd. Currently working on tuning software & marketing material for VEMS. MembersPage/Gabor - Installing a Genboard 3.0 on a Suzuki Swift MembersPage/Pascal - mainly interested in ignition and ion sense MembersPage/JohanEriksson - About to get GenBoard/VerThree to work with my Volvo turbo engine MembersPage/JayJames - Mostly Ford oriented, want to learn programming, and very interested in helping with work Dana Scott is pursuing, aka, EEC clone MembersPage/RobinJohansson - V3 in a 16v Volvo 244 turbo MembersPage/RichardBarrington - Implementing v3.1 on my Range Rover, and developing a v3.2 system for a V8 Capri. MembersPage/MikaelPihlblad - Audi 100 Turbo Quattro, that will run on GenBoard/VerThree. MembersPage/KeithHargrove sly - help in development of v3 etc. MembersPage/EricN - trying to figure it all out for use in a gt40 replica. MembersPage/PatrickB - Building a supercharged 347ci small block Ford on which I wish to run an ion sensing ignition MembersPage/BenK - Hoping to implement GenBoard V3.1 into a Saab 900 to control ignition and fueling. MembersPage/BAhyow - help in development of V3.x. Specializing in 4 cyl BMW engines (m10 and s14). MembersPage/FredrikJagenheim - Hoping to put it in a Nissan 180SX. MembersPage/NolanGarth - Opting to use MSAVR on a Bi-Turbo Kit-CAR MembersPage/Bender??? - New to VEM, researching Genboard V3 application on Volvo 850 5 cylinder with DIS MembersPage/Daihard MembersPage/Purnank MembersPage/SpenD - TVR Chimaera 430, waiting for v3.2 MembersPage/SamiKorhonen - GenBoarded??? Opel Ascona MembersPage/IstvÃ??¡n - BMW 3.5 turbo M102 E30 MembersPage/MikhailPolovinko - planning to use MS-AVR on VW Golf Mk2 MembersPage/GintsK - Genboards for a bit serious projects. Latvia. Curently AUDIs. MembersPage/ZsoltFelfoldi - planning to control GenBoard/VerThree for (non-liquid) LPG control and OtherUses MembersPage/GaborRacz - Trying to help my friend using GenBoard in various add-in turbo car projects, planning some programming work in firmware and contributing docs about our experiments MembersPage/JayMcKearn - Building GenBoard/VerThree controlled lexus v8 powered custom car. MembersPage/JeffreyRichard - A complete guide to implementing the MS-AVR on a Datsun L28ET engine. MembersPage/LonnieCole - Building a Cadillac V8 powered Fiero roadster. Want to run distributor-less ignition PFI and eventually add a turbo. MembersPage/Philipp??? Zuend - Building an Audi Urquattro with modified 20V Turbo Engine coming from an Audi S4 on Genboard v3 MembersPage/AdamFoch - Going to be setting up an MSAVR on a Toyota Celica All Trac Turbo MembersPage/ArnoudvanderWel - Want to use VEMS to bring EFI to my Guzzi V-twin MembersPage/RichardChwiendacz - Looking to acquire a VEMS/MSAVR board to replace my current B&G Megasquirt system in my '92 Ford Escort GT Turbo - I would also like to be a solid contributor to the documentation/manual/faq effort. MembersPage/TravisPieper - Looking for Fun and affordable way to FI a Jeep 4.2L w/GM HEI Distributor and 4.0L(Non HO) Intake Manifold as a Winter Project MembersPage/SteinOvePrestmo - mk1 VW Golf GTI with 1.8T 20V engine MembersPage/SietzeSchukking - 1989 Ford Scorpio Cosworth V6 4x4, Cosworth V6 Kit Car almost finished, Cosworth V6 Bi-turbo 4x4 Kit Car in study. MembersPage/JamesKlyne - Merkur XR4Ti with an HY35w. MembersPage/Stefcross MembersPage/IanGilmore - 93 VW Eurovan with Audi 10v Turbo motor swap MembersPage/DaveBlundell - 91 CRX LS/Turbo, 95 Civic Ex Coupe, 87 CRX Si ZC soon to be turbocharged. Active in Honda DIY EFI, want to get involved here. MembersPage/JoseLCortes - I´m trying to manage GSXR1000 engine with Genboard V3.1 (racing use). MembersPage/BPoindexter - I am building a custom drag bike with a 107in^3 v-twin. MembersPage/DaveHartnell - Many Vehicle installs -- [FireandFuel] MembersPage/JoakimRÃ??¸ed - Newbie. 73 AMC Hornet. Singel turbo 366cid V8. Want to run COP and sequential injection with V3.1. MembersPage/SteveShack - MGB interested in assisting development especially arm stuff MembersPage/LuciuS??? - Rx7 fan and owner MembersPage/MarcelBlokpoel - Installing v3.1, playing with LPGandBiFuel and staged injectors on a turbo motor MembersPage/SimonLuger - Project engine is a supercharged fiat 1.242L 16V soon running with genboard MembersPage/TrondPedersen - Olds69 with 468 in need of fuel injection MembersPage/BrianD - New to VEM, researching Genboard V3 application on Volvo 850 5 cylinder with DIS MembersPage/DerrickScirocco - I am Derrick and I am trying to convert from a sub-par TEC2 to a Genboard V.3 ECU on my VW. MembersPage/Serrano - I'm into Audi's, maintenance and improving as well MembersPage/PieterOonincx MembersPage/ChrisC - 94 VW 2.0 MembersPage/HughJinjin - Talk about yourself MembersPage/MartinFranck - Talk about yourself MembersPage/JuhaK - To continue RadioBoard MembersPage/RonaldAa - 1972 VW 411 with injection MembersPage/MustangStef - Talk about yourself MembersPage/JimW - 85 VW Golf MembersPage/MicaelAman - Locost Seven MembersPage/FredZ??? - EA82T MembersPage/DTechnologies - 2001 Turbo Hayabusa - 300HP or bust! MembersPage/TerroRx ? Newbie - planning to use Genboard on a twin turbo chevy 355 MembersPage/DamianButters - Planning to implement Boost Control & Water Injection for University project MembersPage/BernardAhyow - Planning to use Genboard V.3 on a BMW S14 race engine with knock control MembersPage/DavidAndruczyk - MegaTunix author MembersPage/GoranStegrin MembersPage/SamuelLindkvist - V3.2 on an BMW S14 race-engine. MembersPage/GeorgSzabo - Honda racecar mechanics, engine-installer and tuner MembersPage/EzDi - Plan Genboard V3 for turbo Saturn w/boost control MembersPage/RedMist - Attempting to use a V3 for datalogging on a Bunderson race car. MembersPage/DanielBriggs??? - planning to use V3 on an Incon twinturbo 94 mustang GT. MembersPage/SoerenMartinSoerensen - planning to use Gemboard on MGB V8 MembersPage/AlexanderGuy - Working on MegaTunix, and planning a Genboard install in an 87 Turbo RX-7. MembersPage/MarcusSvedberg - Volvo B230FK 16V Turbo MembersPage/VladoMaliniak? - Ford Escort Cosworth MembersPage/JohanErikssonluleasweden - Running GenBoard/VerThree on opel Calibra 16v 2.0 turbo MembersPage/HansK - Planning to use Genboard V.3 on my VW Golf. MembersPage/EmilMalmsten - TwinTurbo??? v8 MembersPage/EsaMankki - Planning on using Genboard V.3 as a replacement ECU for early nineties Mitsubishis. MembersPage/MattiasSandgren - Spends his time installing VEMS Genboard on his friends cars in northern Sweden (BMW and some Volvo installs). MembersPage/SirKan - Plans to use genboard v3.2 on my 1987 MAZDA RX-7 Turbo II MembersPage/JisopPark - Planning to replace the Haltech ECU with Genboard v3.2 for Alfa romeo 2.5L,GTV6 MembersPage/JamesBaughn - Twin turbo 1999 Mustang with a 5.0L explorer motor. MembersPage/PeterSchneeberger - Rover V8 in kit car Dax Rush - conversion from carb to EFi MembersPage/NickLaTech -PID control for Boost MembersPage/MikeLough - goal to bring Vems to the next level MembersPage/TrefortSchool - goal is to experiment with control theory and engine, computers, learn a lot MembersPage/GerbenvdLei - Converting his mot-ms 1.9 turbo to vems MembersPage/SteenAndersen - Newbie, experiment/learn more to eventually replace old CIS injection. MembersPage/DeanPavlekovic - Planning to use VEMS for DIS ignition on Jaguar 5.3L HE V12 engine. MembersPage/BenNesbitt - Audi 4.2l 32v V8 installed in 1993 80/90 quattro - ALMOST RUNNING! MembersPage/AudiQuattro CHANGE NAME!! - Building A4 Quattro 1996 with V8 PT 3.6 1991 engine MembersPage/BengtR - Adapting v3.2 to turbocharged BMW 2.5 liter inline 6. MembersPage/CameronBrewster - My goal is to get my genboard ver. 3.2 running on my VW VR6 turbo GTI! MembersPage/PeterJensen - 89 VW Corrado g60 turbo MembersPage/AngeloDePascale - Adapting v3.2 to an Aprilia RSV1000 motorbike. MembersPage/DuncanThomson - Fitting v3.2 to a 5 cyl Audi MembersPage/DanielHenriksson - Using Genboard 3.2 on Toyota 3SGTE engine, 1988 GT-Four/Alltrac MembersPage/SimonMarmander - Genboard v3.2 on a volvo 164 Turbo MembersPage/FredrikHafslund - Trying to get v3.2 up and runing on a BMW m50b25, and supercharging the engine. MembersPage/ManuLeinonen - BMW M50B25T without vanos + Genboard v3.3. MembersPage/OveMestad - Testing v3.2 in a school project. MembersPage/AttilaSzucs - Trying to get v3.2 up and runing on a Suzuki GTi 1.3 Turbo MembersPage/GergelyLezsak - BMW E30 325i with turbo running on GenBoard v3.3 MembersPage/AntonLilja - Will build an Audi 7A (5-cyl 20v N/A) engine, turbo convert it and use GenBoard v3.3 for fuel and DIS ignition. MembersPage/RobertOffner - Will install a Genboard V3 on his Fiat Uno Turbo MembersPage/Soma -Fiat uno Turbo project MembersPage/GeorgePapas - Will install a Genboard V3 on his BMW E30 325i with turbo MembersPage/AndreasThulin - Will install a Genboard V3 on Bmw e36 328 Turbo MembersPage/NanassyPeter - Audi20VT (2.3L 5 cyl) MembersPage/MackHooper - Coming back to the fold, hoping to contribute to firmware develoment. Genboard v2.2 for fun, Genboard v3 on Audi 12v V6! MembersPage/MaxHofman?? - Will use a Genboard v3.3 to control a v6 Duratec highly mod. with custom made throttle bodies and manifolds for twin turbo config. MembersPage/KeithDurand - Will use a Genboard v3.3 to control a Honda CBR600 engine. Plans to create a stripped down Genboard for racing. MembersPage/GeneHerron - Will port code to a PIC 18F6722. I already paid for the compiler. Will run the product on a 305 in a 1977 Chevy Caprice classic. MembersPage/TimJ - Will run a GenBoard on his Audi A4 1.8TQ MembersPage/WhistlerRacing/SkodaOctavia Skoda Octavia with Audi 1.8 4cyl 20valve engine MembersPage/WhistlerRacing - plan to install GenBoard in several racecars (mostly Renault and Opel). MembersPage/EsbenNorby - Use GenBoard v3.3 on a Kawasaki ZXR 750 MembersPage/MagnusKarlstrom - Trying to install v3.3 on my Porsche 944 -83 MembersPage/JoeStroller - interested in VEMS used with the Rover K-series engine used in Lotus Elise, Rover 200, Caterham Seven & MGB. MembersPage/MarteleurTim - Setting up v3.3 on BMW M10 MembersPage/MarteleurTim/page2 - Setting up v3.3 on BMW M10 part 2 MembersPage/GavinHarris - Stealth installation on a R19 16v MembersPage/JanSaenen - BMW E30 325i Turbo MembersPage/PowerPak - Planning BMW M50B25 turbo MembersPage/PeteO - Alfa Romeo 75 Twin Spark MembersPage/PeterKonyha-Planning a v 3.3 on a Nissan Cherry turbo MembersPage/FiatStilo - v3.3 on a 1.8L 16 valve NA racecar MembersPage/AxelWall - Volvo 744, NA B23 2.3L 4-cyl. COP. MembersPage/FredrikEriksson - BMW M535i e28 -87, Twinturbo MembersPage/TeppoKalske - Audi RS2 with PnP v3.3 MembersPage/JensKierkemann - 3.3 on Toyota 7M-GTE MembersPage/TyGymProjekt - Group effort to install GenBoard v3 on a SAAB 9-5 4-Cyl Turbo. MembersPage/JannoKusman - Doing research to install GenBoard v3.3 to Nissan 200sx CA18DET using InputTrigger/NissanTrigger MembersPage/Robin - Audi 2.2L 5cyl 20VT turbo MembersPage/IrbensA - Planning to turbocharge BMW 325iX with M20B25 MembersPage/RikardAhlin - Building a BMW M10 racecar engine. MembersPage/JohanCarlsson - School project Sweden Volvo C70T engine MembersPage/RonnieH - Volvo 2.4l 5cyl V70N engine MembersPage/NielsenRacing - Volvo 242 Turbo, 4cyl 2.8L B23/16V with v3.3 MembersPage/JoelZernask - Audi Coupe Quattro '86 with an '89 3,6 V8 and Genboard v3.3 MembersPage/ESjaavik - Maserati Spyder. V6, Twin Turbo MembersPage/GenboardFiero - '88 Formula Fiero L67 (3800 SC) Engine swap MembersPage/RenaultClioTurbo - 1.2L 8V 130 Hp MembersPage/EqUus - getting familiar with the hardware and programming, for other (not engine related) applications MembersPage/BillHart - V3.3 project also MembersPage/BillHart/WinMobileLogger PDA logger. I am looking for any comms code examples for talking to V3.x firmware. MembersPage/DickSafier - Gen 3.3 board powered BMW 87 325is. MembersPage/Andrey - V3.2 VAZ 21011 1.4L 1979. MembersPage/KoenVanBrusselen - Trying to understand WIKI :) MembersPage/TomPhillips - Alfa Romeo V6 V3.3 project MembersPage/NicolasGobet - VW supercharged aircooled type 4 MembersPage/JeroenBosma - 1973 Ford Escort Mk1 / Duratec I4 2,3l MembersPage/RagnarBurenius - Installing v3.3 on '00 Yamaha R6-engine MembersPage/DianEsterhuyse - V3.3 MembersPage/KoabiBrooks - Installing v3.2 on '88 VW Scirocco 16v Turbo MembersPage/ClausAudiQuattro - Quattro 90 with a 3B engine MembersPage/SAYBOR - Audi with a 5cyl. 3B engine MembersPage/JakeCederblad - V3.3 Genboard on 1985 Corvette, 350 with supercharger, ethanol, I'm tying to get it working with stock wireing and sensors. MembersPage/YasecElise - V3.3 Genboard on Lotus Elise 4 cyl. High performance(/L) NA racecar MembersPage/JimmieJ - First experience with VEMS, planning install on a 5 cyl. Fiat/Lancia engine. MembersPage/Skassa -Installing vems on a Toyota age86 20 black head MembersPage/JanneMantyla - Honda D16Z6 SOHC-VTEC, ITBs with AlphaN, VTEC drive. MembersPage/ZoltanAlmasi - Ford Sierra Cosworth 2wd. MembersPage/PeepPaadam - Porsche 931 2.0 w/ k26/29 Turbo under development MembersPage/RichardWeller - Peugeot 309 GTI, 1.9, 8v, NA MembersPage/JohnJensen - BMW MembersPage/RobertAdolfsson - Volvo 745 Turbo '90, B230FT. Installing VEMS 3.3. Added some sensor info about good (and relatively cheap) TPS/MAT sensors. Suggestions about pre/primary fuel pump selection are very welcome. MembersPage/CocorToyota - Celica , turbo ,water inj, nos , v3.3 MembersPage/EirikWOlsen - Misc projects 1. Volvo 240 B230 turbo 2 X Strømberg, v3.3 controlling ignition only, totally green, need help =P MembersPage/FredrikBruland - Datsun260z with RB25DET multitooth trigger system, Vems 3,3 MembersPage/Sascha - Multiple VEMS V3.3 Projects MembersPage/Micha - GsxR MembersPage/TommyDeCock MembersPage/TomVanOmmeren - Installing into 1988 SAAB 900 Turbo MembersPage/NPCompletePerformance - Developing Plug-and-play kit for Dodge Neon SRT-4 using all stock sensors. MembersPage/VdBVolvo Volvo 244 with a B21ET engine. MembersPage/OveJohansen Audi 80 GTE Quattro (4000Q) 2,5l 20v MembersPage/Bvd BMW 635 csi. MembersPage/KuunoLotamois - Hyundai Tiburon 2.0T w Vems 3.3 under development MembersPage/OnlyAudi - another 5 cyl 2.2L Audi engine from Canada MembersPage/RallyeNLD - V3.3 on a Peugeot 106 Rallye 1.6 MembersPage/MarkoTsirk - Opel Astra 2.0T w Vems 3.3 under development MembersPage/DanielDrahos - BMW 325i 1988 with VEMS 3.3 under development MembersPage/Billman - Audi RS2 Thoughts and Suggestions MembersPage/FXLegends - 2005 Nissan Sentra project MembersPage/BmwVenesz - 4 cyl BMW MembersPage/FSTeamDelft - Delft TU Formula student team MembersPage/Japso - Saab 9000 Turbo 2.4L -86 Searching trigger settings. MembersPage/Michael Atkinson - Toyota Corolla AE86 MembersPage/PeteLeh-Porsche 944 turbo 1989 MembersPage/TimEgan-Porsche 928 MembersPage/BasilDaham-Mostly BMW and VW installs MembersPage/OleErikBerg-Volvo 242 Turbo MembersPage/AndréSaethern - Mini 16V. MembersPage/LevaiJozsef - Lada 2103 2.0 Turbo MembersPage/PaulF - VW Splitscreen Camper - 2.1 Aircooled MembersPage/JasonPepas - 1967 chevy 292 ci inline 6. MembersPage/Sprocket - Group A Spec 1399cc Mini SPi MembersPage/PerBoddum - Rover Compressor MembersPage/JanBöse - Peugeot 205 2093cm³ 16V turbocharged MembersPage/NathanielAllen - Toyota MKIII Supra 1jz-gte MembersPage/DavidCarr - Subaru EJ22 MembersPage/PeteKrgr Porsche 944 turbo MembersPage/KevinBlack - Various VW projects MembersPage/Agriv8 - Rover V8 type 7 MembersPage/RubenAparici - Lancia Delta HF integrale projects MembersPage/JyrkiK - Opel Calibra Turbo MembersPage/EvertDuindam - Citroen CX 25 Gti Turbo 2 MembersPage/KimAchren - BMW turbo MembersPage/TeroKortteenpohja - VW Scirocco 87, 1.8l 20V Turbo MembersPage/MattBushell - Nissan 200sx S13 - WB02 Install + Stuff MembersPage/PaalPolizei - VW Golf 2 "Polizei", 1.8l 16vt MembersPage/MartinOlsen - Vw Corrado g60 tURBO MembersPage/MeKom - VW Type IV - 2.0 AirCooled MembersPage/LaszloHorvath - '93 Audi S4 with Plug&Play VEMS for AAN MembersPage/LanciaTurbo MembersPage/ReinisAndersons - BMW E30 with M50B25 MembersPage/Ákos - mostly 6 cylinder BMW engines MembersPage/Akos/AudiAbz - 4WD autocross "buggy" one-seat racecar with V8 Audi engine MembersPage/LacaSubaru MembersPage/Elbow - 2,2 20V turbo S6 avant MembersPage/MatthewThorne - Multiple Cars! MembersPage/RicoZiemer - BMW e30 with M30B35 MemberPage/MilanaPerisic - First VEMS project,BMW E30 327i tuRbo MemberPage/AldoQuiroga First VEMS projetct VW air cooled Type 1 MemberPage/Lorden - GM V8 project MembersPage/BrendanCampion - Porsche 928 MembersPage/MihkelOsa - Subaru Impreza GT MY99 MembersPage/TormasiAudiAan MembersPage/OleBlach ---- A Wiki is marvelous tool, but it was intimidating to me at first. If you would like to learn and practice a bit, try these links: * Text formatting- [More Wiki text formating] [Safe practice place] * Wiki General Information- [Ultimate Wiki info source] [File upload tool] If you create your personal file section, do it under Memberspage/... (old ones don't need to move) Have Fun!! [[! MembersPage/MatthewThorne MembersPage/KimAchren]] Memberspage/Golf Gti lpg
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.