######  
  ##  ## 
  ##     
  ##     
 ####    
         

     ##  
     ##  
  #####  
 ##  ##  
 ##  ##  
 ##  ##  
  #####  
         

         
         
 ##  ##  
 ##  ##  
 ##  ##  
  #####  
    ##   
 ####    

         
### ###  
 ##  ##  
 ##  ##  
 ##  ##  
 ##  ##  
  ### ## 
         

 _______ 
(       )
| () () |
| || || |
| |(_)| |
| |   | |
| )   ( |
|/     \|
         

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
I have installed c20let engine (2.0 16v turbo) and f28 gearbox (fwd 6 speed) from Opel Calibra turbo into 1990 Opel Kadett E GSI and Vems-ed it. Here are some pics: pics coming soon '''Engine:''' water-cooled 2000cc, DOHC, 16V with std KKK turbocharger, big intercooler, std. cams, 9:1 cr and std. head. Boost is going to be manualy controled from 0.8 to 1.2 bar. Engine is redlined at arround 6500rpm. It has 205 bhp in std. form and arround 280bhp with std. ecu chiptuned to 1.2 bar so I plan to achive that with V3.1 board. Here is my config: '''Priming, Cranking, Afterstart:''' <code> primep=00 primep_temp_scaling=B0 cwl=C0 cwh=17 cranking_thres=03 awev=0A awev_temp_scaling=A4 awc=3C </code> ---- '''Warmup:''' <code> warmup_clt_range[0]=00 warmup_clt_range[1]=14 warmup_clt_range[2]=28 warmup_clt_range[3]=3C warmup_clt_range[4]=50 warmup_clt_range[5]=64 warmup_clt_range[6]=78 warmup_clt_range[7]=8C warmup_clt_range[8]=AA warmup_clt_range[9]=C8 warmup_clt[0]=B0 warmup_clt[1]=AE warmup_clt[2]=AC warmup_clt[3]=AA warmup_clt[4]=A0 warmup_clt[5]=96 warmup_clt[6]=8C warmup_clt[7]=87 warmup_clt[8]=82 warmup_clt[9]=64 warmup_rpm_scale=64 </code> ---- '''Injectors:''' (4 pieces of std. highZ calibra turbo injectors 304 cc/min @3bar.) <code> req_fuel=6E divider=01 alternate=13 injopen=20 battfac=10 kpafac=7F kpaoffs=A8 injocfuel=08 injrampup_battfac=FF injpwm=FF injpwmt=FF injpwm6=00 rpmk[0]=0B rpmk[1]=B8 </code> ---- '''TPS, fuelcut:''' <code> tpsdot_kpadot_conf=00 tpsdotrate[0]=05 tpsdotrate[1]=14 tpsdotrate[2]=28 tpsdotrate[3]=4D tpsaq[0]=00 -tuning VE table right now so acc. enrichment is set to zero tpsaq[1]=00 tpsaq[2]=00 tpsaq[3]=00 tps_thresh=05 tpsasync=0A acmult=64 tpsacold=05 tpsdq=64 decel_fuelcut_thres=24 overrun_fuelcut=10 overrun_fuelresume=0F rev_limit=46 airden_ignore=62 config11=30 config12=30 config13=02 batt_cal=BC fastidle=80 baro=64 dbaro=0C tps_low=28 tps_high=C2 fan_temp=F9 fan_hyst=04 fan_channel=07 </code> ---- '''Idle valve:''' std. PWM valve from cally turbo (BOSCH 2 280 140 516). <code> iac_step_seq=C9 iac_conf=08 iac_max_steps=C8 iac_tps_thres=0D iac_cold_idle_temp=BF iac_warm_idle_temp=C7 iac_cold_rpm=6E iac_warm_rpm=5A iac_cold_start_pos=BF iac_warm_start_pos=A6 iac_afterstart_rpm=0A iac_afterstart_duration=20 iac_speed=04 iac_kp=0F iac_ki=0C iac_kd=A0 iac_integral_speed=DC iac_integral_limit_dec=12 iac_integral_limit_inc=64 iac_integral_deadband=0A iac_deadband=05 iac_pid_conf=01 iac_overclose_interval=B8 iac_ref_pos[0]=BF iac_ref_pos[1]=BD iac_ref_pos[2]=B8 iac_ref_pos[3]=B5 iac_ref_pos[4]=B3 iac_ref_pos[5]=B3 iac_ref_pos[6]=AB iac_ref_pos[7]=A8 iac_ref_pos[8]=A6 iac_ref_pos[9]=A6 iac_sol_channel=50 iac_ign_advance_change=50 iac_ign_retard_change=50 iac_ign_advance_limit=10 iac_ign_retard_limit=10 iac_ign_threshold=08 </code> ---- '''EGO:''' <code> ego_conf=07 ego_lag=10 ego_coolant=CF ego_maxtps=FF ego_maxmap=FF ego_minrpm=0F ego_maxrpm=FF ego_warmup=3C ego_lean_limit=66 ego_rich_limit=4D ego_pid_kp=40 mt_unused=00 ego_delta=02 ego_target=19 ego_pid_window=FF </code> ---- '''WBO2:''' <code> wbo2_warmup_ramp=A0 wbo2_warmup_target=FF wbo2_abs_limit=E4 wbo2_limit_maxt=A0 wbo2_fallback=60 wbo2_retry_t=06 wbo2_edgetime_corr=BA wbo2_edgetime_min=50 wbo2_ri_target=96 wbo2_nernstdc_target=8D wbo2_pump_pw_zero=66 wbo2_calibration=D5 wbo2_heater_pid_kp=46 wbo2_heater_pid_ki=10 wbo2_heater_pid_kd=1A wbo2_heater_pid_ilimit=80 wbo2_pump_pid_kp=40 wbo2_pump_pid_ki=2E wbo2_pump_pid_kd=08 wbo2_pump_pid_ilimit=84 wbo2_ri_confidence_scale=80 </code> ---- '''Knock:''' (not used for now) <code> knock_conf=FF knock_sampling_window=FF knock1_frequency=29 knock1_gain=FF knock1_integrator=FF knock2_frequency=29 knock2_gain=FF knock2_integrator=FF knock_threshold=FF knock_noise_scale=FF knock_max_retard=00 knock_default_retard=00 knock_retard_step=FF knock_retard_delay=FF knock_advance_step=FF knock_advance_delay=FF knock_minrpm=FF knock_maxrpm=FF </code> ---- '''VE learn:''' <code> ve_learn_coolant=D8 ve_learn_max_power=FF ve_learn_rpm_scale=28 ve_learn_kpa_scale=28 ve_learn_ego_scale=50 ve_learn_min_weight=50 ve_learn_speed=E0 ve_learn_limit=FF ve_learn_conf=01 </code> ---- '''LCD:''' <code> lcd_c0=06 lcd_delay=22 lcd_backlight=70 lcd_offs[0]=FF lcd_offs[1]=FF lcd_offs[2]=FF lcd_offs[3]=FF lcd_default_view=03 </code> ---- '''Trigger:''' (std bosch VR sensor from calibra with bosch 60-2 wheel) <code> primary_trigger=01 secondary_trigger=02 tooth_wheel=3A trigger_tooth=08 another_trigger_tooth=1E crank_minper=50 tooth_wheel_twidth1=06 tooth_wheel_twidth2=12 cam_sync_r_edge_phase=FF cam_sync_f_edge_phase=FF reset_engphase_after=FF ign_tdcdelay=9A </code> ---- '''Ignition:''' (Wasted spark coil from Ford Edis system controlled by Vems) <code> ign_dwell14=3E ign_dwell6=A0 ign_crank_advance=50 ign_out=70 ignchmax=03 </code> ---- '''Fuel pump:''' <code> engine_off_delay=08 pump_on_mintime=0F fuelpump_channel=47 </code> ---- '''The rest:''' <code> inj_stage2_rate=00 inj_stage2_start_tps=00 inj_stage2_start_map=00 als_deact_rpm=03 als_deact_time=00 als_deact_egt=00 als_retard=00 als_rev_limit=00 misc1out_minrpm=00 misc1out_maxrpm=00 misc1out_mintps=00 misc1out_maxtps=00 misc1out_minmap=00 misc1out_maxmap=00 misc1out_channel=FF misc2out_minrpm=00 misc2out_maxrpm=00 misc2out_mintps=00 misc2out_maxtps=00 misc2out_minmap=00 misc2out_maxmap=00 misc2out_channel=FF act_wot_rpm=FF act_wot_channel=FF act_rpm_rpm=FF act_rpm_channel=FF egt1_cal=00 egt1_offs=00 boost_conf=00 boost_targetoffs=00 boost_minpressure=FF boost_pid_kp=00 boost_pid_ki=00 boost_pid_kd=00 boost_pid_ilimit=00 boost_channel=FF water_pump_temp=00 hybrid_rpm_a=00 hybrid_rpm_m=00 water_pump_hyst=00 water_pump_channel=FF toothrel_normal=8A toothrel_missing=B5 fuelcut_min_kpa=0E fuelcut_max_kpa=E1 tach_channel=1F tach_divider=00 shiftcut_conf=01 shiftcut_channel=FF shiftcut_time=01 </code> Here is hardware setup of my vems: MembersPage/TonciLoncar/OpelKadettTurbo/VemsHardware
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.