##  ##  
 ##  ##  
 ##  ##  
  #####  
    ##   
 ####    

         
         
  ### #  
 #   ##  
 #   ##  
  ### #  
      #  
  ####   

         
|\     /|
( \   / )
 \ (_) / 
  ) _ (  
 / ( ) \ 
( /   \ )
|/     \|
         

         
         
 ######  
    ##   
   ##    
  ##     
 ######  
         

         
         
 #    #  
  #  #   
   ##    
  #  #   
 #    #  
         

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
'''Sensor info:''' Engine temp sensor has got two sensor outputs unit G62 and G2 (OEM VAG Unit) '''Engine temperature sensor (G62)''' ||Temp. (deg C)||Resistance (ohm)|| ||75|||395|| ||70||450|| ||46.5||1003|| ||39.4||1240|| ||30.0||1757|| ||25.0||2097*|| ||23.5||2200|| ||16.0||2800|| ||-8.3||8300|| *Calculated value Pin-out (on sensor) Pin 1 - Brown/Gray (signal) Pin 3 - Gray/white (Ref. Gnd) '''Temperature sensor for Dash gauge (G2)''' ||Temp. (deg C)||Resistance (ohm)|| ||80|||157|| ||45.5||460|| ||40.1||557|| ||30.0||803|| ||23.5||1008|| ||16.0||1300|| ||-5.5||3600|| Pin-out (on sensor) Pin 2 - Brown Pin 4 - Blue/Brown '''Air inlet temperature sensor''' ||Temp. (deg C)||Resistance (ohm)|| ||63.5||560|| || 55|| 739 || || 48 || 905 || || 41.5 || 1116 || || 39 || 1220 || || 37 || 1295 || || 35 || 1390 || || 28.4 || 1786 || || 27.5 || 1841 || ||25.0||2018*|| || 22.8 || 2175 || || 19.3 || 2580 || || 14.0 || 2800 || || -5.1 || 5110 || || -7.0 || 7110 || || -7.3 || 7400 || *Calculated value Pin-out (on loom connector) Pin 1 - Signal Pin 2 - Ref. Gnd '''VR - Crank sensor''' Pin-out (loom)3 wires Pin ? - Black (Shield gnd) Pin ? - Blue (Ref. gnd) Pin ? - Gray (Signal) Resistance between Gray and Blue 478ohm (at room temp.) '''Hall sensor - Camshaft''' Pin-out (on loom connector) Pin 1 - +5V Pin 2 - Signal Pin 3 - Ref. Gnd '''Knock sensors (G61) & (G66)''' Torque: 20Nm '''G61''' Pin-out (on loom connector) Pin 1 - Signal Pin 2 - Ref. Gnd Pin 3 - Shield Gnd '''G66''' Pin-out (on loom connector) Pin 1 - Signal Pin 2 - Ref. Gnd Pin 3 - Shield Gnd '''EGT''' TBA ---- '''Primary trigger log''' Logged 12.12.06 Terminal command: Manmlp01 mdf01 (then logged with terminal) RPM:0000 W00SFFI00 99 -00 c0000 i0000 clt: 14C adv:+09 0362 iac:224 135 RPM:0000 W00SFFI00 99 -00 c0000 i0000 clt: 14C adv:+09 0362 iac:224 135 RPM:0000 W00SFFI00 99 -00 c0000 i0000 clt: 14C adv:+09 0362 iac:224 135 RPM:0220 W00S36IFF 99 -00 c0000 i0001 clt: 14C adv:+09 0373 iac:224 135 RPM:0249 W01S4AIFD 99 -00 c0000 i0003 clt: 14C adv:+09 0373 iac:224 135 RPM:0249 W01S63IFB 88 -00 c0000 i0006 clt: 14C adv:+09 0373 iac:224 135 RPM:0249 W02S04IF8 99 -00 c0000 i0008 clt: 14C adv:+09 0373 iac:224 135 RPM:0250 W02S1EIF6 99 -00 c0000 i0009 clt: 14C adv:+09 0373 iac:224 135 RPM:0251 W02S57IF5 90 -00 c0000 i000B clt: 14C adv:+09 0373 iac:224 135 RPM:0241 W02S6CIF2 99 -00 c0000 i000E clt: 14C adv:+09 0363 iac:224 135 RPM:0137 W03SFFIF2 99 -00 c0000 i000E clt: 14C adv:+09 0363 iac:224 135
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.