____  
  / __ \ 
 | |  | |
 | |  | |
 | |__| |
  \____/ 
         
         

         
         
  #####  
 ##  ##  
 ##  ##  
  #####  
     ##  
     ##  

         
         
 ######  
    ##   
   ##    
  ##     
 ######  
         

         
         
  ####   
 ##  ##  
 ######  
 ##      
  ####   
         

  _     
 | |    
 | |    
 | |___ 
 |_____|
        

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
'''Sensor info:''' Engine temp sensor has got two sensor outputs unit G62 and G2 (OEM VAG Unit) '''Engine temperature sensor (G62)''' ||Temp. (deg C)||Resistance (ohm)|| ||75|||395|| ||70||450|| ||46.5||1003|| ||39.4||1240|| ||30.0||1757|| ||23.5||2200|| ||16.0||2800|| ||-8.3||8300|| Pin-out (on sensor) Pin 1 - Brown/Gray (signal) Pin 3 - Gray/white (Ref. Gnd) '''Temperature sensor for Dash gauge (G2)''' ||Temp. (deg C)||Resistance (ohm)|| ||80|||157|| ||45.5||460|| ||40.1||557|| ||30.0||803|| ||23.5||1008|| ||16.0||1300|| ||-5.5||3600|| Pin-out (on sensor) Pin 2 - Brown Pin 4 - Blue/Brown '''Air inlet temperature sensor''' ||Temp. (deg C)||Resistance (ohm)|| ||63.5||560|| || 55|| 739 || || 48 || 905 || || 41.5 || 1116 || || 39 || 1220 || || 37 || 1295 || || 35 || 1390 || || 28.4 || 1786 || || 27.5 || 1841 || || 22.8 || 2175 || || 19.3 || 2580 || || 14.0 || 2800 || || -5.1 || 5110 || || -7.0 || 7110 || || -7.3 || 7400 || Pin-out (on loom connector) Pin 1 - Signal Pin 2 - Ref. Gnd '''VR - Crank sensor''' Pin-out (loom)3 wires Pin ? - Black (Shield gnd) Pin ? - Blue (Ref. gnd) Pin ? - Gray (Signal) Resistance between Gray and Blue 478ohm (at room temp.) '''Hall sensor - Camshaft''' Pin-out (on loom connector) Pin 1 - +5V Pin 2 - Signal Pin 3 - Ref. Gnd '''Knock sensors (G61) & (G66)''' Torque: 20Nm '''G61''' Pin-out (on loom connector) Pin 1 - Signal Pin 2 - Ref. Gnd Pin 3 - Shield Gnd '''G66''' Pin-out (on loom connector) Pin 1 - Signal Pin 2 - Ref. Gnd Pin 3 - Shield Gnd '''EGT''' TBA ----
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.