_____ 
 | ____|
 |  _|  
 | |___ 
 |_____|
        

  _____ 
 |_   _|
   | |  
   | |  
  _| |_ 
 |_____|
        
        

         
         
  ####   
 ##      
 ##      
 ##      
  ####   
         

 _   _ 
( ) ( )
| |_| |
|  _  |
| | | |
(_) (_)
       
       

 _______ 
(  ____ \
| (    \/
| |      
| | ____ 
| | \_  )
| (___) |
(_______)
         

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
||MembersPage/Sascha/AudiSfour||MembersPage/Sascha|| === Sascha Audi S4 2.7T - PNP VEMS/Motronic Piggyback === Evenfire v6 ... MembersPage/DamirMuha (mwfire on ChatViaIrc) probably has sample settings * **Current configuration** **Primary Trigger: Stock 60-2 Wheel and VR sensor **Cam sync: Maybe *** camsync recommended for COP (avoid ign dualout that wears the ignition outputs and ignition transformers). Camsync not required for wasted spark coils (like the Bosch Motorsport 3x2). **** need to determine how many window the camsync is. I know the early 1.8T has 1 window cam sync. Hoping for the same. **Injectors: 6x ID1000 **Ignition: Stock/OEM Coilpacks (3 wire). *** Are these active coils (or have a firewall mounted Power Output Stage "ignition amplifiers" ?) **** Non Active coils themselves, but POS is located on top of the OEM airbox (mounted to heatsink) **TPS: 0-5 ref. from DBW TB or pedal **CLT: Stock **IAT: Stock **IAC: DBW TB **Knock: Maybe === Engine === * **Stock 2.7L APB** **TiAL S605 Turbo kit ** 9.2 : 1 Compression **3" > 2.5" Downpipe (no cat) to 3" Milltek Exhaust **Stock Intake Manifold **Stock Cam + Head **1x Bosch 044 intank === ECU Details (to be ordered): === * **1x VEMS V3.6 - fully assembled + tested ECU** **8x INJ ** '''2+6 IGN''' ? *** if only 2 IGBT (but 6 + 4 logiclevel ignition outputs together with stepper outputs), than active coils needed. **** Was planning to use stock POS for OEM coils or move to Hitachi 4 wire active coils eventually. **400kpa MAP **2x EGT input **1x LCD output **Primary tigger: VR **Sec. trigger: HALL **1-wire **Firmware 1.1.88 **1x ECU Connectors w/ crimps **1x Bosch LSU4 connector w/ crimps **1x I-Button base **2x I-Button fob
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.