### ###  
 ##  ##  
 ##  ##  
 ##  ##  
 ##  ##  
  ### ## 
         

         
         
 #    #  
 #    #  
 #    #  
 #   ##  
  ### #  
         

 ###     
  ##     
  ##     
  #####  
  ##  ## 
  ##  ## 
 ######  
         

         
|\     /|
| )   ( |
| |   | |
| |   | |
| |   | |
| (___) |
(_______)
         

         
         
  #####  
 ##      
  ####   
     ##  
 #####   
         

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
After the FirstProblem is solved I want to log my Ignition to get an Idea how much Advance vs. boost i have. Do i need to populate the second LM1815 Chip? I want to log the Ignition in the car, because my Ignition have two triggers (first one every 180deg on TDC Cyl. 1+4 and on TDC Cyl. 2+3, second one 122teeth per revolution at the Starter gear). Is it right that i need a cable from the Coil Pin 1 to the input of the second trigger? In my_make: LOG_ALIEN ? SEND_DWELL_NOT_IAC ? CAPTURE_ALIEN_ECU O.K. MS_COMPATIBILITY NOT defined O.K. MSNS NOT defined O.K. See my notes on OnlineCourse/AlienIgnitionLogging In global.h i found for trigger2: bit0 0:falling/1:rising, bit1 0:enable/1:disable, bit2 0:no filtering/1:filtering, bit3 0:toothwheel/1:coil, bit4 0:alien advance/1:cam sync, bit5 0:single edge/1:both edges when cranking so i think config.secondary_trigger=13 ? The most frustrating work for a newbie is Sensor calibrating. I changed the gentherm2 utility for my needs. You put the three temp-resistance Pairs in and get a hex file out with which you can patch vems.hex. I put my Sensor calibration Data and this program into files/MembersPage/OffnerRobert/Sensors. I found a little Problem with hexpatch and my VDO cltfactor file: #snip# NOTE: hexfile line neglected: # NOTE: hexfile line neglected: ERROR: not a hexa digit: a ERROR: not a hexa digit: b ERROR: not a hexa digit: c ERROR: not a hexa digit: d ERROR: not a hexa digit: e ERROR: not a hexa digit: f NOTE: hexfile line neglected: :020000020000FC replaced (idx=1f) to: :1003f0002D2A282624211E1B1814100C060000008C replaced (idx=20) to: :10030000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD replaced (idx=21) to: :10031000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFCF1 replaced (idx=22) to: :10032000F9F7F5F3F1EFEDEBEAE8E6E4E3E1E0DE1F replaced (idx=23) to: :10033000DDDBDAD8D7D6D4D3D2D0CFCECDCCCAC994 replaced (idx=24) to: :10034000C8C7C6C5C4C3C2C1C0BFBEBDBCBBBAB9A5 replaced (idx=25) to: :10035000B8B7B6B5B4B3B2B2B1B0AFAEADACACAB8A replaced (idx=26) to: :10036000AAA9A8A8A7A6A5A4A4A3A2A1A1A09F9E4C replaced (idx=27) to: :100370009D9D9C9B9B9A99989897969595949393FD replaced (idx=28) to: :10038000929190908F8E8E8D8C8C8B8A89898887A4 replaced (idx=29) to: :1003900087868585848383828180807F7E7E7D7C45 stats: 11 lines replaced (6053 remained) #snip# Maybe somebody knows why this is? If I patch the vems.hex with hexedit - no problem. Hope it helps.
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.