_ _ | \ | | | \| | | . ` | | |\ | \_| \_/
_ _ ( ) ( ) | |_| | | _ | | | | | (_) (_)
____ | _ \ | |_) | | _ < | |_) | |____/
# # # ### ## # # # # # # #
_________ \__ __/ ) ( | | | | | | | | )_(
IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now. Visit Preferences to set your user name Summary of change: VEMS Round with Motronic 7.1 VEMS Round using the following input: - WBO2 - EGT - Analog 1 --> 10 bar oil pressure sensor - Analog 2 --> 400kPa VEMS Map sensor Currently there is no way to display *BOTH* analog outputs on the display. I would like to see both boost and oil pressure on the slots. Outputs: - PWM0 -> reference RPM drive warning led for shiftlight - PWM4 -> reference RPM drive "shift-now" led for shiftlight Both PWMs should reference RPM and start sending PWM signal to the respective leds when reached the configured RPM. Either needs a new target method for both PWM outputs or a hackish way is to configure an unreachable EGT or lambda target. Sounds like a crap solution. - Linear wideband output is connected to Motronic 7.1 for data-logging. (This Motronic ECU is dual-narrowband with dual EGTs for mixture preparation.) - RPM input is coming from the Motronic RPM signal (instrument cluster), can this even be configured or do we need a crank signal?! If that's the case the documentation (Help) should be change to state something other than "RPM Signal". Optional: Add document to category: Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.