##  ##  
 ##  ##  
 ##  ##  
  ####   
   ##    
         

     #   
         
    ##   
     #   
     #   
     #   
 #   #   
  ###    

         
         
 #####   
 ##  ##  
 ##  ##  
 ##  ##  
 ##  ##  
         

         
     ##  
     ##  
  #####  
 ##  ##  
 ##  ##  
  #####  
         

   ___  
  / _ \ 
 | | | |
 | |_| |
  \__\_\
        

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
'''This page documents ECU features to be utilised in the EJ25 N/A DOHC installation''' ---- || ''Feature'' || ''Spec'' || ''Hardware utilised'' || ''Software support'' ||''Priority''|| || Sequential injection || 4 x 11.5 Ohm injectors || 4 x injector drivers|| Yes || - || || Wasted spark ignition || Diamond F-569 coilpack || 4 x ignition drivers|| Yes || - || || Stepper idle control || || Stepper outputs || Yes || - || || Fuel pump || || Fuel pump relay output || Yes || - || || MAP || 0-5V range || OEM external pressure sensor (Auto and Turbo models only?) || Yes || - || || LCD || || 4x40 LCD output || Yes || - || || Dual wideband lambda || Bosch LSU || WBO2 channels 1 and 2 || Partial (comparison and range testing should be done) || Low || || EGT || || EGT sensor || Partial (is this used for more than display?) || Low || || Knock sensor || "AC voltage output" || Knock channel || Partial (is this used for more than display?) || Low || || Cooling fans || || 2 relay outputs || Partial (only 1 fan switch is supported) || Medium || || Subaru crank trigger || 87/32 degree signal, TDC 10 before. Magnetic VR || VR 1 || No || High || || Subaru cam sync || 1,2 or 3 pulses to determine cylinder, so order is important (eg, to know cyl. 1 vs cyl. 4). Magnetic VR || VR 2 || No || High || || EGR Valve || Solenoid || Misc driver 1 || No || Medium || || PCV Valve || Solenoid || Misc driver 2 || No || Medium || || Pressure Select Valve || Solenoid (manifold/barometric select) || Misc driver 3 || No || Medium || || EVAP Valve || Solenoid || Misc driver 4 || No || Medium || || Warning Lamp (CEL) || Dashboard lamp || Misc driver 5 || No || Low || In [http://en.wikipedia.org/wiki/MoSCoW_Method MoSCoW] parlance: High = Must Have, Medium = Should Have, Low = Could Have.
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.