##      
 ##      
 #####   
 ##  ##  
 ##  ##  
 ##  ##  
         

         
         
 ##  ##  
  ####   
   ##    
  ####   
 ##  ##  
         

 _    _ 
( )  ( )
`\`\/'/'
  >  <  
 /'/\`\ 
(_)  (_)
        
        

         
         
  ####   
 ##  ##  
 ##  ##  
 ##  ##  
  ####   
         

         
         
 ### ##  
 #  #  # 
 #  #  # 
 #  #  # 
 #  #  # 
         

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
'''Some Audi PNP Config Files.''' This is files taken from car`s I`ve been tuning. These can be used as startup files and could probably be useful for some. All files are from 1.1.77 or later using VemsTune. '''Audi RS2:''' PNP, ADU Engine, Siemens Deka 630cc injectors@4bar, Fully built engine with 8.5 to 1 comp. Turbonetics super60 0.68ar, 98oct fuel, ported head with 7A cams, Standar vems MAT sensor. Hall-inverter 034 high output coils http://www.vems.hu/files/Reidar/Memberspage/Audi%20RS2%202.2L.vemscfg '''Audi RS2:''' PNP, 7A head with LongBlock, bigger valves, 8.5 to 1 Comp, Precision 6262 0.68ar, MTM cams. Standar Vems MAT sensor, This car is dynoed at 98oct fuel to 670hp and 760nm at 1.8 bar boost. RC injectors 750@3bar running 4bar. boose controlled by N75 valve, 034 high output coils, None Hall-inverter http://www.vems.hu/files/Reidar/Memberspage/Audi%20RS2%202.5L.vemscfg '''AUDI S2:''' PNP, 3B engine, precision 6262 0.68ar, 9.3 to 1 comp, stock cams, siemens deka 630cc running at 4bar, boost controlled by n75 (High boost 2.3bar), Standar vems MAT sensor, stock coil, Hall-inverter http://www.vems.hu/files/Reidar/Memberspage/Audi%20S2%202.2L%203B.vemscfg '''Audi S6:''' PNP, AAN engine, Ported, schrick cams, 8.5 to 1, GT35R turbo, dynoed 634hp and 732nm, siemens deka 630 running at 4bar, standar vems MAT sensor. Boost by N75, 1.8T coils, Hall inverter http://www.vems.hu/files/Reidar/Memberspage/Audi%20S6%202.2L.vemscfg '''Audi S6:''' PNP, AAN, STANDAR AUDI PTC MAT SENSOR, Longblock 2.5L with ported head and 7A cams, GT3071 0.63ar Turbo. 8.5 to 1 comp. Dynoed 478hp, siemens deka 630cc running at 4bar. Boost by N75, 034 high output coils.Hall inverter http://www.vems.hu/files/Reidar/Memberspage/Audi%20S6%202.5L.vemscfg -------- Need help Understanding Triggerlog basics and with audi trigger: Question: Do the TDC-pin auditrigger show up in the trigger log? Have a look at the picture. With this many missing thoots. How does the car still run without trigger errors? It get trigger errors at 1400rpm, but not above. FW 1.1.80 If the ecu miss one tooth on the 135tooth trigger wheel, what happens? http://www.vems.hu/files/Reidar/Memberspage/Missing%20tooth.jpg
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.