##   
         
   ###   
    ##   
    ##   
    ##   
 ## ##   
  ###    

         
         
 ##  ##  
 ####### 
 ####### 
 ## # ## 
 ##   ## 
         

 _____ 
(  _  )
| ( ) |
| | | |
| (_) |
(_____)
       
       

         
         
  ####   
 #    #  
 ######  
 #       
  ####   
         

______ 
|  _  \
| | | |
| | | |
| |/ / 
|___/  
       
       

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
Testing firmware 1.2.15 Knock Car: Hyundai 1.6 16v Wasted spark 60-2 no cam ---- '''Short checklist''' * newest VemsTune ** Help menu / update ini ** don't forget that [http://vems.hu/vt/help VT help] on web can be newer than inside VT. Especially for new code (like electronic throttle) or when modified strategy is introduced (like boost) or some system is changed significantly like knock. See [http://vems.hu/vt/help/v3/v3_knock_control.html VT knock help] ** apply the configlets. Knock has configlets for everything, a good idea to use those as a starting point ** apply "Validate" - no substitute for the above steps, but it warns of many possible-problems * if in doubt, go back to some simple (disable function by values minkpa=512 mintps=100%, or "disable" flag, or both). ---- 26/8-2013 Updated Vt 1.5.11 (23 new files) ETC disabled then ok. EtcMenu could be moved to other throttle menus :-). Lambda issue: Still I have to lower the req. fuel from 16 to 7-8ms. Lambda gauge shows strange values not table value. In knock channel settings. If all is 1 then typing 3=2 ok, 2=2 ok, 1=2 ok, and then 0=2 it changes something in fuel pulse width and I can put 16 ms in req. fuel as normal value and lambda gauge is correct value now. If rebooting ecu all are wrong again and have to change req, fuel to 7-8 to get the car running. Changing 1 and 0 is not recorded in log data somehow, time 11.52. If disabling knock i.e. 1 to 240 everything is then normal req. fuel 16 ms and lambda gauge is correct value now. The knock settings is deficiently changing some part of the fuel calculation. New logfile to look at. http://www.vems.hu/files/MembersPage/PeterJensen/Hyundai/v3.3_u004815-2013.08.26-17.40.40.vemslog ---- Knock seams to work nice, I can hear the engine knocking and see the spikes in Vt. Issue. Can you try with latest VT, and run "update ini"-s ? Also, check validate. You accidentally got ETC (electronic throttle) enabled but your (nonexisting throttle) cannot reach target, effecting fuelcut, ... '''Disable ETC'''. 1: When loading 1.2.15 I have to reduce req. fuel from 16 to 12 ms 2: Also I have to type in big numbers for Fuel cut and fuel resume (20000 and 19000) this function act like rpm limiter now so something Is wrong her. 3: If playing with knock sensor 1 and 2 it will effect the lambda value somehow. Sensor like 1-1-1-1 is good 1-1-1-2 will make lambda go bad. (nothing connected to knock input 2) 4: Gauge of lambda target is not showing the correct value of the lambda table. Nice function to have: Ve live tuning is a cool function and if we could have the same function for knock it would be great. Tune your car so you believe there in no knocking (low ignition advance) then turn on “knock live tuning” and Vt will store all numbers in the knock table. Then you will have all threshold values stored easily. Also we could use a “if_knock” Flag/tag and a counter for every cyl. http://www.vems.hu/files/MembersPage/PeterJensen/Hyundai/knock.jpg 3 log files to look at. The car is not tuned well cores of the hack I made to get this firmware to work at all http://www.vems.hu/files/MembersPage/PeterJensen/Hyundai/v3.3_u004815-2013.08.25-11.51.55.vemslog http://www.vems.hu/files/MembersPage/PeterJensen/Hyundai/v3.3_u004815-2013.08.25-12.15.31.vemslog http://www.vems.hu/files/MembersPage/PeterJensen/Hyundai/v3.3_u004815-2013.08.25-12.27.23.vemslog
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.