_   _ 
( ) ( )
| |_| |
|  _  |
| | | |
(_) (_)
       
       

    #    
         
   ##    
    #    
    #    
    #    
   ###   
         

   ____ 
  / ___|
 | |    
 | |___ 
  \____|
        

         
         
 #####   
 ##  ##  
 ##  ##  
 ##  ##  
 ##  ##  
         

     _    
    / \   
   / _ \  
  / ___ \ 
 /_/   \_\
          

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
Audi S2 Trigger problems. ---- Solved the trigger issue for box 18515 As I had pre. trigger errors I compared box 18515 with 10045. I did not find big changes in pre. trigger only R30 was different. So tested all kind of R30 pull up from 10K to 250K but no luck. I noted that the computer had hard time to connect and only 2 to 8 Hz update frq. This can only be noise. So I investigated the pcb further and find that the GND bridge there was mounted a diode ?? Dissoldering this diode and the S2 was spinning agene. I do not know why vems.hu think this is a good ide to root that noise into the processor side, maybe the diode was mounted the wrong way? Also I have mysterious map readings. Image will explain that. End of 4 days of work and testing. http://www.vems.hu/files/MembersPage/PeterJensen/s2_log_new/vems1.jpg http://www.vems.hu/files/MembersPage/PeterJensen/s2_log_new/vems2.jpg http://www.vems.hu/files/MembersPage/PeterJensen/s2_log_new/vems3.jpg ---- '''"custom Audi 3B ecu."''' * 1: 5 output for logic level vag coils. 50 cm of wire from the ecu to a Econoseal 10 pin in the end of wire´s. Please write a schematic of what wire goes to witch cylinder for easy install and set up the corret firing order in Vt. This is a brand new engine so I cant crank a lot but need to drive the car fast for run in test. * 2: 2 x knock * 3: output to carbon canister valve N80 55p pin 5 (please set it up in Vt) ---- New Audi 3B box '''v3/18515 arrived''' today thanks for that. Made the config file and tried to start. The new box have trigger errors (less pre. trigger) so NO GO. What is changed in the box regard to box 10045? Never had any trigger problems with box 10045. We compare '''your project notes (from old and new) and measurements''', and look up benchtest records. Scope is best, but at least DVM DC measurements required. http://www.vems.hu/files/MembersPage/PeterJensen/s2_log_new/New_box_18515_cranking.jpg http://www.vems.hu/files/MembersPage/PeterJensen/s2_log_new/New_box_18515_nopower.jpg http://www.vems.hu/files/MembersPage/PeterJensen/s2_log_new/New_box_18515_power.jpg ------- http://www.vems.hu/files/MembersPage/PeterJensen/s2_log_new/old_box_cranking.jpg http://www.vems.hu/files/MembersPage/PeterJensen/s2_log_new/old_box_nopower.jpg http://www.vems.hu/files/MembersPage/PeterJensen/s2_log_new/old_box_power.jpg ----
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.