___   
(  _`\ 
| ( (_)
| |___ 
| (_, )
(____/'
       
       

###      
 #####   
 ##  ##  
 ##  ##  
 ##  ##  
 ##  ##  
#### ### 
         

         
         
  ###    
     #   
  ####   
 #   #   
  ### #  
         

         
         
 #     # 
 #  #  # 
 #  #  # 
 #  #  # 
  ## ##  
         

 _______ 
(  ___  )
| (   ) |
| (___) |
|  ___  |
| (   ) |
| )   ( |
|/     \|
         

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
BMW M50 Vanos. v3 '''srl=13013''' * [http://vems.hu/download/v3/Motronic88/ configs] (since srl is 13xxx) ** appropriate vemscfg to start: http://vems.hu/download/v3/Motronic88/base_M50_vanos_1.2.31_srl13xxx.vemscfg /base_M50_vanos_1.2.31.vemscfg ** as originally uploaded (not the srl107xx or the old base_M50_vanos_1.2.31.vemscfg , sorry for the misinformation: it was late night, and got no one in the lab to doublecheck) * of course calibrating TPS and lower req_fuel OK for big injectors His orig config was quite close, except some minor calibrations (sound good), and: -prohibit_config=00 +prohibit_config=80 Was that intentional change ? ---- '''Ign output''' see '''m50 VANOS column''' in [http://vems.hu/download/v3/Motronic88/M50-vanos-vs-s50b32.xls xls] , this is igndualout compatible (since opposite cyls are driven by neighbors 3,2 ; 6,7; 0,1) ||'''cyl''' || '''ignch''' || ||1|| 3 || ||5|| 0 || ||3|| 6 || ||6|| 2 || ||2|| 1 || ||4|| 7 || h[2]=00 30 70 10 20 60 10 70 ---- '''Under investigation''' Is the '''main relay connected to ignch5 as in the xls or ignch4 as in the base_M50_vanos_1.2.31_srl13xxx.vemscfg file''' ? misc2out_channel=42 (ignch4); Doublecheck this; do NOT set now; we to activate main relay''' NOT blow an ign transformer fuse; ---- 17/06/2016 - Jason customer states 2 coils aren't operational after loading the file from download/v3/Motronic88... I opened the brd file in Eagle, grabbed a connector to count pins. mot88 pin 23,24,25,50,51,52 are the coils according to both "M50-vanos-vs-s50b32.xls" and bmw_pinouts.xls (both in the downloads Motronic88 directory. Eagle has Drive07 -> mot88/23, ||BMW mot88||description||v3_output (Eagle BRD verified)||baseM50vanos config||What it should be|| ||23||ign cyl 4||drive07||drive05||drive07|| ||24||ign cyl 6||drive02||drive01||drive02|| ||25||ign cyl 5||drive00||drive03||drive00|| ||50||ign cyl 1||drive03||drive00||drive03|| ||51||ign cyl 2||drive01||drive02||drive01|| ||52||ign cyl 3||drive06||drive04||drive06|| Interestingly, drive04 and drive05 are the channels the customer says doesn't work, which backs up the hardware findings. According the the brd file, drive04 goes to mot88/7 which is vanos solenoid on the m50vanos, and drive05 goes to mot88/27 which is the main relay activation. So it appears our default config for m50vanos is bad in the ignition output area (at least.. that's where my focus has been so far).
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.