##    
    #    
    #    
    #    
    #    
    #    
   ###   
         

    ##   
   #  #  
   #     
 #####   
   #     
   #     
   #     
         

  ______
 |___  /
    / / 
   / /  
  / /__ 
 /_____|
        
        

         
  #####  
 ##  ##  
 ##      
 ##      
 ##   #  
  ####   
         

         
         
 #####   
 ##  ##  
 ##      
 ##      
 ##      
         

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
Honda S2000 Stock engine Engine setup : 4 separate throttle bodies '''24+1 trigger''' * 1 vr cranksensor 12 teeth * 1 vr cam sensor 1 teeth ---- '''Outputs''' * inj cyl 1 on injA * inj cyl 3 on injG * inj cyl 4 on injH * inj cyl 2 on injF Wasted spark bobine * cyl1/4 on pin 34 * cyl2/3 on pin 36 using megatune 1.1.23 with firmware 1.1.23 For now all injectors fire simultaneaously and engine runs well on idle. If i rev up to 3000rpm, a status bar in megtune states "missfire". However engine runs well. * Could this be because same ign-output appears twice in hardware map? ** No. "wheel error" is related to trigger input. Having same ign-output at several places in h[2] is OK, and should not cause wheel-error I want to fire the injectors sequentially and did bench tests for this. On bench, injectors fire separate and in the right order, but the timing seems to be random. If i spin the engine, eg inj a fires first. I stop and do the same test, and then another injector fires first. How do i control the moment of injection? my config (as far as trigger concerned, which config did you start from ?): primep=00 primep_temp_scaling=00 cwl=14 cwh=0A cranking_thres=05 awev=41 awev_temp_scaling=0F awec=C0 warmup_clt_range[0]=00 warmup_clt_range[1]=0F warmup_clt_range[2]=23 warmup_clt_range[3]=37 warmup_clt_range[4]=50 warmup_clt_range[5]=64 warmup_clt_range[6]=78 warmup_clt_range[7]=8C warmup_clt_range[8]=AA warmup_clt_range[9]=C8 warmup_clt[0]=B4 warmup_clt[1]=AC warmup_clt[2]=A0 warmup_clt[3]=90 warmup_clt[4]=83 warmup_clt[5]=7E warmup_clt[6]=78 warmup_clt[7]=70 warmup_clt[8]=6B warmup_clt[9]=64 warmup_rpm_scale=BF req_fuel=28 divider=04 alternate=00 injopen=00 battfac=13 kpafac=89 kpaoffs=87 injocfuel=2A injrampup_battfac=FF injpwm=00 injpwmt=FF als_launch_input=CF rpmk[0]=0B rpmk[1]=B8 tpsdot_kpadot_conf=00 tpsdotrate[0]=08 tpsdotrate[1]=0F tpsdotrate[2]=19 tpsdotrate[3]=28 tpsaq[0]=01 tpsaq[1]=02 tpsaq[2]=05 tpsaq[3]=0A als_cut_mintps=FF tpsasync=02 acmult=C8 tpsacold=96 launch_enrich=00 launch_retard=00 overrun_fuelcut=14 overrun_fuelresume=13 rev_limit=4D airden_ignore=00 config11=31 config12=40 config13=16 batt_cal=C1 fastidle=C6 als_max_cut=00 dbaro=0C tps_low=98 tps_high=4B fan_temp=E3 fan_hyst=05 fan_channel=17 iac_step_seq=C9 iac_conf=00 iac_max_steps=FF iac_tps_thres=08 iac_cold_idle_temp=90 iac_warm_idle_temp=C6 iac_cold_rpm=78 iac_warm_rpm=5C iac_cold_start_pos=E6 iac_warm_start_pos=D9 iac_afterstart_rpm=0F iac_afterstart_duration=96 iac_speed=32 iac_kp=14 iac_ki=0F iac_kd=1E launch_rpm=14 iac_integral_limit_dec=32 iac_integral_limit_inc=8C iac_integral_deadband=14 iac_deadband=0A als_cut_maxtps=00 iac_overclose_inter iac_ref_pos[0]=BF iac_ref_pos[1]=B3 iac_ref_pos[2]=A6 iac_ref_pos[3]=99 iac_ref_pos[4]=8C iac_ref_pos[5]=80 iac_ref_pos[6]=73 iac_ref_pos[7]=66 iac_ref_pos[8]=59 iac_ref_pos[9]=4D iac_sol_channel=FF iac_ign_slope=20 softrpm_range=04 iac_ign_advance_limit=08 iac_ign_retard_limit=08 iac_ign_threshold=08 ego_conf=06 ego_lag=01 ego_coolant=99 ego_maxtps=E6 ego_maxmap=FF ego_minrpm=06 ego_maxrpm=49 ego_warmup=3C ego_lean_limit=33 ego_rich_limit=0D ego_pid_kp=28 als_enrich=00 ego_delta=59 ego_target=19 ego_pid_window=FF wbo2_warmup_ramp=C0 als_react_tps=00 wbo2_abs_limit=F5 wbo2_limit_maxt=A0 wbo2_fallback=60 wbo2_retry_t=06 als_retard_rpm1=FF als_retard_rpm2=FF wbo2_ri_target=9A wbo2_nernstdc_target=89 wbo2_pump_pw_zero=68 wbo2_calibration=CE wbo2_heater_pid_kp=46 wbo2_heater_pid_ki=10 wbo2_heater_pid_kd=1A wbo2_heater_pid_ilimit=80 wbo2_pump_pid_kp=15 wbo2_pump_pid_ki=37 wbo2_pump_pid_kd=00 wbo2_pump_pid_ilimit=FF wbo2_ri_confidence_scale=80 knock_conf=01 knock_sampling_window=FF knock1_frequency=28 knock1_gain=3F knock1_integrator=1 knock2_frequency=28 knock2_gain=3F knock2_integrator=1F knock_threshold=FF knock_noise_scale=FF knock_max_retard=00 knock_default_retard=00 knock_retard_step=00 knock_retard_delay=00 knock_advance_step=00 knock_advance_delay=00 knock_minrpm=FF knock_maxrpm=FF ve_learn_coolant=D8 ve_learn_max_power=FF ve_learn_rpm_scale=1E ve_learn_kpa_scale=1E ve_learn_ego_scale=43 ve_learn_min_weight=4D ve_learn_speed=FF ve_learn_limit=33 ve_learn_conf=00 lcd_c0=FE lcd_delay=FF lcd_backlight=FF kpa_conf=21 als_igncut_rpm2=FF als_retard_ als_retard_maxtps=00 lcd_default_view=00 primary_trigger=03 secondary_trigger=19 tooth_wheel=18 trigger_tooth=03 another_trigger_tooth=06 crank_minper=4E tooth_wheel_twidth1=78 tooth_wheel_twidth2=00 cam_sync_r_edge_phase=00 cam_sync_f_edge_phase=00 reset_engphase_after=F0 ign_tdcdelay=9E ign_dwell14=30 ign_dwell6=38 ign_crank_advance=24 ign_out=70 ignchmax=03 engine_off_delay=0A pump_on_mintime=0A fuelpump_channel=57 inj_stage2_rate=FF inj_stage2_start_tps=FF inj_stage2_start_map=FF als_igncut_rpm1=FF als_deact_time=01 als_deact_egt=00 als_retard=00 als_rev_limit=40 misc1out_minrpm=29 misc1out_maxrpm=FF misc1out_mintps=00 misc1out_maxtps=FF misc1out_minmap=00 misc1out_maxmap=FF misc1out_channel=07 misc2out_minrpm=FF misc2out_maxrpm=FF misc2out_mintps=FF misc2out_maxtps=FF misc2out_minmap=FF misc2out_maxmap=FF misc2out_channel=FF act_wot_rpm=FF act_wot_channel=FF act_rpm_rpm=4E act_rpm_channel=67 egt1_cal=47 als_tks_channel=FF boost_conf=00 boost_targetoffs=00 boost_minpressure=FF boost_pid_kp=20 boost_pid_ki=80 boost_pid_kd=01 boost_pid_ilimit=FF boost_channel=FF water_pump_temp=00 hybrid_rpm_a=FF hybrid_rpm_m=FF water_pump_hyst=00 water_pump_channel=FF toothrel_normal=66 toothrel_missing=7F fuelcut_min_kpa=00 fuelcut_max_kpa=FF tach_channel=FF tach_div=FF shiftcut_conf=01 shiftcut_channel=FF shiftcut_time=00 softrpm_rpm=FF k[0]=00 05 09 0E 15 1C 25 31 3C 49 61 79 r[0]=05 0A 0F 14 19 1E 28 32 3C 46 50 5A h[0]=E1 E1 E1 E1 E1 E1 E1 E1 h[1]=12 0C 06 00 08 04 00 00 h[2]=30 20 30 20 20 30 20 30 b[0]=28 30 38 40 48 50 58 60 60 60 60 60
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.