###  
   ##    
  #####  
   ##    
   ##    
   ##    
         

    #    
         
   ##    
    #    
    #    
    #    
   ###   
         

         
|\     /|
| )   ( |
| (___) |
|  ___  |
| (   ) |
| )   ( |
|/     \|
         

         
         
  ####   
     ##  
  #####  
 ##  ##  
  #####  
         

         
         
 # ###   
 ##   #  
 ##   #  
 # ###   
 #       
 #       

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
I'm going to help in conversion from B&G MS to VEMS in friend's n/a Jetta 16v. * 4 cyl fuel injection, Hi-Z injectors * Ignition with distributor, probably will go to wasted spark later * PWM controlled idle valve * 1xWBo2 * trigger from hall in distributor, 1 pulse/cylinder '''Shopping list:''' * 1 x GenBoard v3.2 * 1 x Econoseal36-PCB * 1 x Econoseal36-Wire * 1 x Econoseal18-PCB * 1 x Econoseal18-Wire * 1 x Alubos1600 * 1 x Alubos EC frontplate transparant * 1 x Alubos Endplate transparant * 1 x Alubos gasket * 8 x Injector driver (FQFP..) * 5 x Ignition driver (IGBT) * 1 x WBO2 heater driver (FQFP..) * 1 x Ignition driver insulator sheet * 1 x 2.5 bar MAP sensor * 1 x Wideband connector ---- '''Information hunting''' Let's assume one who never before has browsed through wiki has just got his V3.2 order. He might end up wondering what to do next? Does he need to solder something by hand? A little searching brings following pages: * BuildProcedures/SectionThree * GenBoard/Manual/InitialTesting/VerThree contains some information about the hardware to check * GenBoard/VerThree/Testing contains same kind of information * GenBoard/Manual/WBSensorControllerCompleting * Some information is collected to the StepByStep page So there is something to start. Maybe a proper step-by-step guid is needed, I'll try collecting the issues to a separate page from this exercise. ---- '''04.04.2005''' Board/case assembly is now mostly completed after some not-so-active period. * Partially commented configuration files added here. These are not in any proper shape yet, mostly copied from GRM's config but will update once I get to the some real business. ** [http://www.vems.hu/files/MembersPage/MiskaPeippo/config.txt config.txt] ** [http://www.vems.hu/files/MembersPage/MiskaPeippo/tables.txt config.txt] '''03.03.2005''' Completing of the controller begins. Although board has a most of the parts already soldered on it, a few components still needs to soldered by hand. * Injector driver FETs (TO220) * Ingition IGBTs (TO220) * WideBand sensor driver (DPAK) There are also several items to check before even thinking to plug the board to the car. * items to check listed here.. '''01.03.2005''' Ordered items arrived ---- more details will follow..
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.