##### ## ## ## ## ## ## ## ##
_____ | ___| | |__ | __| | |___ \____/
##### ## ## ## ## ##
IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now. Visit Preferences to set your user name Summary of change: '''Jonas Wikströms Volvo 142''' http://www.vems.hu/files/MembersPage/MattiasSandgren/VolvoB20/jonas_volvo_142_winter.jpg ---- The engine in this car is a stock Volvo B20 with a need of retirement. A refurbished B20 is taking it's place only with a very much upgraded head and longer stroke. Basically this engine is an inline 4 cylinder, with no electronic control over anything. * 2.0 litre inline 4 cylinder Volvo B20A, completly stock * Custom crank trigger with Honeywell GT1 Hall sensor * Single coil and distributor ignition * Sequential fuel injection with no cam sensor and high-Z 192 cc/min injectors * Custom engine harness [http://www.vems.hu/files/MembersPage/MattiasSandgren/VolvoB20/config.txt config.txt] and [http://www.vems.hu/files/MembersPage/MattiasSandgren/VolvoB20/tables.txt tables.txt] The future upgrade is a stroked and bored B20 block with a heavily ported head and aggressive cam (300 degrees duration). The fuel injectors will be 300 cc/min with the possibility to run alcohol fuels. Approximate crank power is 170-180 hp, compared to the stock 85 hp. * Hi, do you have any pictures of your injector setup? What intake manifold did you use, probably not one from B20E/F? ---- '''Update 2005-10-07''' This car has been started up with VEMS as of today, ignition only. Trigger is through a Honeywell GT1 at the crank with a custom trigger disc. Spark is through the stock distributor, the car is already running much better due to not having to rely on worn points in the distributor. Fuel is for next weekend, everything but the fuel plumbing is done. Stay tuned. '''Update 2005-10-15''' Today the carburator was removed and the fuel injection manifold was mounted to the head. Started right up after increasing cranking pulsewidth and thereafter req_fuel to get it idleing. You can download a short movie from the moment we got it to idle well, right [http://media.savarturbo.se/jw/jonas_b20_vemsified_20051016.mov here] (15.4 MB). ---- Optional: Add document to category: Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.