####   
 ##  ##  
 ######  
 ##      
  #####  
         

 _ 
(_)
| |
| |
| |
(_)
   
   

         
         
 ##  ##  
 ##  ##  
 ##  ##  
  #####  
    ##   
 ####    

         
 ##      
 ##      
 #####   
 ##  ##  
 ##  ##  
 #####   
         

         
         
 ######  
    ##   
   ##    
  ##     
 ######  
         

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
'''Tomas Audi S6''' '''Technical data''' Audi S6 2,2t -96, AAN-engine, VEMS v3.3 with Motronic connector, Box no. 1986 * New trigger solution with cam Hall inverter * IAT is NTC type * Siemens 630 cc/min injectors. I have done one other Audi: MembersPage/MattiasSandgren/OskarAudiSFour But that one doesn't have the cam Hall inverter (but works flawlessly anyway). Here is the config, tables, MSQ and datalog of my problem: http://www.vems.hu/files/MembersPage/MattiasSandgren/TomasAudiSSix/ '''Problem description''' Above 4000 rpm the engine runs very well without hesitations or other problems, feels strong and runs with a clean sound. No sign of trigger, ignition or other ECU problems. The problem is below about 4000 rpm we have something that can be described as slight misfires or the engine simply cutting out. No real signs of problems in the datalogs from what I can tell. The idle is slightly rougher in quality than stock and the lambda value varies just a bit too much for this type engine. The daily driving is the "show-stopper". If the engine is given any load above light driving, like a strong acceleration it will appear to misfire. The datalog shows trying to accelerate in 3rd gear at low throttle, the engine cuts out rhytmically, 2nd gear is then used to accelerate past 4000 rpm and then given full throttle without any hesitation from the engine. There is no black clouds of unburnt gasoline, which is kind of strange. I have a mobile phone video of the car passing by with light acceleration in 2nd gear, I will upload it later. The injector pulsewidth in the datalogs look normal, no fuel cut in action from what I can see. No trigger errors either, unless someone can tell me how to tell from an LCD display page (mlp02?). What is the next logical step? Oscilloscope of the trigger signal? Gas analyzer will probably tell me something is wrong, but won't fix the problem.
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.