_______ / ___ ) \/ ) | / ) / / / / / (_/\ (_______/
## # ## ## # # ## ## # ### ## ## ## # #
## ## ##### ## ## ## ## ## ##
_ | | | | | | | |____ \_____/
#### # ## ## ## ## ## ## ## ## ##### ###
IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now. Visit Preferences to set your user name Summary of change: '''Wiring Page''' '''Ignition''' AEB 3 wire passive COP coils Running in wasted spark initially Dual Output Mode Outputs (traversed backwards): "0" Select 6+7, Pins 24,10 "1" Select 2+3, Pins 34,36 O/P...Output# Pin # Cylinder # 1...........2..........34...........1 0...........6..........24...........3 1...........3..........36...........4 0...........7..........10...........2 ---- '''Analog Inputs:''' ecu18/16 analog 5 WOT ecu18/12 analog 7 Launch ---- '''Outputs:''' ch 0 pin 4 Tach w/510 Ohm Pull-up ch 1 pin 16 - SPARE ch 4 pin 3 Intercooler Pump Relay ch 5 pin 15 FP relay ch 6 pin 31 Fan ch 7 pin 30 Shift light ---- For available outputs, see: http://www.vems.hu/wiki/index.php?page=GenBoard%2FManual%2FDigitalOut%2FTable ---- Boost Control: Pin 6 / Injector 7 / "G" / "6" in the h[0] Injector Output Table Idle Control: Pin 17 / Injector 8 / "H" / "7" in the h[0] Injector Output Table To enable these, you go into the Injector Output Table, and at the bottom starting at "7": "7" select "128" which enables "INJ 8" "6" select "64" which enables "INJ 7" For Boost and Idle Control, wire a Switched 12v power to the valves. The ECU triggers Ground. ---- Intercooler Pump: Relay output see above. Control: Misc Output 1 / 2,000 RPM / 50% TPS / 90 kpa MAP ---- '''Injectors:''' Pin # Cylinder 7............1 19..........3 8............4 20..........2 ---- Optional: Add document to category: Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.