___   
(  _`\ 
| ( (_)
| |  _ 
| (_( )
(____/'
       
       

         
         
  ####   
 ##  ##  
 ##  ##  
 ##  ##  
  ####   
         

         
         
 #####   
 ##  ##  
 ##  ##  
 ##  ##  
 ##  ##  
         

         
         
  ### #  
 #   ##  
 #   ##  
  ### #  
      #  
  ####   

______ 
|  ___|
| |_   
|  _|  
| |    
\_|    
       
       

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
== KTM 250 RC == '''Startup setup:''' |||| Plug type: EC36 || || Pin no. || Pin’s name || Pin’s connection || ||1||TPS IN||Throttle position sensor|| ||2||IAT IN||Intake air temperature sensor|| ||3||P259 ch.4||Low current output (350 mA), relay control, etc.|| ||4||P259 ch.0||Low current output (350 mA), relay control, etc.|| ||5||GND||Ground|| ||6||Injectpr G ch. 64||Gives signal to an injector|| ||7||Injector A ch. 1||Gives signal to an injector|| ||8||Injector E ch. 64||Gives signal to an injector|| ||9||Injector E ch. 16||Gives signal to an injector|| ||10||Ignition output 07||Gives ignition signal|| ||11||Ignition output 04||Gives ignition signal|| ||12||Ignition output 05||Gives ignition signal|| ||13||Secondary trigger (CAM)||Unused pin|| ||14||CLT||Coolant temperature|| ||15||Fuel relay (P259 ch.5)||Fuel pump relay|| ||16||P259 ch.1||Low current output (350 mA), relay control, etc.|| ||17||Injector H ch. 128||Gives signal to an injector|| ||18||Injector F ch. 32||Gives signal to an injector|| ||19||Injector B ch.2||Gives signal to an injector|| ||20||Injector D ch. 8||Gives signal to an injector|| ||21||GND||Ground|| ||22||GND||Ground|| ||23||Flyback (to injector)||HIGH-Z flyback diode for the injector (40V)|| ||24||Ignition output 06||Gives ignition signal|| ||25||12V from battery||+12V battery source|| ||26||GND||Ground|| ||27||Primary trigger (CKP)||Crankshaft sensor|| ||28||+5V battery||+5V battery source for the sensors|| ||29||TPS battery||Battery source for the throttle position sensor|| ||30||C259 ch. 7||Low current output (350 mA), relay control, etc.|| ||31||P259 ch. 6||Low current output (350 mA), relay control, etc.|| ||32||GND||Ground|| ||33||Ignition output 01||Gives ignition signal|| ||34||Ignition output 02||Gives ignition signal|| ||35||Ignition output 00||Gives ignition signal|| ||36||Ignition output 02||Gives ignition signal||
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.