##  ##  
 ##  ##  
 ##  ##  
 ##  ##  
  #####  
         

         
 ### ### 
  ### ## 
  ##     
  ##     
  ##     
 ####    
         

   ####  
  ## #   
  ##     
 #####   
  ##     
  ##     
 ####    
         

 ___   
(  _`\ 
| (_(_)
`\__ \ 
( )_) |
`\____)
       
       

 _       
( \      
| (      
| |      
| |      
| |      
| (____/\
(_______/
         

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
'''Mazda Miata trigger''' '''Background''' The Mazda Miata is one of the most popular spec race cars in use in Sweden. One very successful combination is to put the 99-01 NB engine in the early 90's cars. The leading race car drivers here in Sweden wish to run with the stock trigger as they want the option to run the car on the stock engine management system if there is a problem. I am developing a plug and play harness for these cars and I would like us to look at the trigger to see if we can make this work reliably. '''Trigger system''' ''' Work in progress. The information available about the trigger is currently insufficient for a trigger implementation. Most of the information I have found on the web is very obviously incorrect.''' The crank and cam sensors are hall triggers on the 99-01 Miata NB engine. The teeth on the crank look like they are made for a VR trigger but it really is a Hall trigger. The crank has four really tiny teeth 90 deg apart. It looks like the triggers occur around 270,180,90 and 0 deg BTDC. If that is the case the decoding is straight forward as the cam trigger occur before TDC. The cam trigger wheel looks like this, the engine is at #1 Compression TDC: Just to make it clear: '''Is that 3 campulses total ? 1 lonelypulse, and (positioned opposite) a doublepulse ?''' * If yes, initial syncup could be similar to subaru 6+7 (but simpler). http://www.vems.hu/files/MembersPage/JorgenKarlsson/MiataNB/2014-10-15%2011.32.45_1024.jpg ---- '''They are not 90 degree apart, they are unsymetric. at something like 80-100-80-100 degrees.''' '''I have trigger log of this. Is is correct. 1 singel then 180 deggre dual puls.''' '''I removed 2 teeth, and got 2 x 180degree teeth and ran waste. Starts every other time.''' '''Now i need Cam sync. /Thorbjörn '''
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.