_______ 
(  ___  )
| (   ) |
| |   | |
| |   | |
| |   | |
| (___) |
(_______)
         

         
 ####### 
 ##  ##  
    ##   
   ##    
  ##  ## 
 ####### 
         

 _    _ 
| |  | |
| |  | |
| |/\| |
\  /\  /
 \/  \/ 
        
        

     ##  
     ##  
  #####  
 ##  ##  
 ##  ##  
 ##  ##  
  #####  
         

         
         
 ##   ## 
 ## # ## 
 ####### 
  #####  
  ## ##  
         

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
As my Genboard v3.3 seems to be installed, I will now try to dig through the configration. I have studied MembersPage/BenNesbitt, who also has a V8 Audi, but he has coil-on-plug ignition, so not entirely applicable to my project. Ignition. * 1989 Audi PT 3,6 liter 32valve V8 * trigger: Primary-VR, Secondary-HALL * firing order: 1-5-4-8-6-3-7-2 * ignition type: wasted spark * coils: two 2*2 coil packs (Bosch 0 221 503 407) Cylinders firing together are: 1 5 4 8 6 3 7 2 The coil packs are connected as follows: EC36-pin35 to Coil 1 EC36-pin33 to Coil 2 EC36-pin34 to Coil 3 EC36-pin36 to Coil 4 Therefore cylinders are wired as follows (see GenBoard/Manual/DigitalOut/Table for driver channel numbers): Cylinders 1 & 6 to Coil 1 to EC36-pin35 drive00 Cylinders 5 & 3 to Coil 2 to EC36-pin33 drive01 Cylinders 4 & 7 to Coil 3 to EC36-pin34 drive02 Cylinders 8 & 2 to Coil 4 to EC36-pin36 drive03 * ignchmax=03 (03..00) * IGNITION OUTPUTS TABLE: h[2]=03 02 01 00 07 07 07 07 ** going from index 3 downto 0, the drive00, drive01, drive02 and drive03 will be fired, in this order. The indexes 4..7 do not matter, 07 was chosen as (a likely nonused channel). h[2]=03 02 01 00 03 02 01 00 would also work. This spark table can be used, right? http://www.ubernugen.com/vems/17octsparkmap1.jpg Be sure to get the base timing (trigger_tooth and igntdcdelay) right.
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.