Editing MembersPage/JanSaenen/Config

 ###     
  ##     
  ##     
  #####  
  ##  ## 
  ##  ## 
 ######

     _    
    / \   
   / _ \  
  / ___ \ 
 /_/   \_\

         
#### ### 
 ##   #  
  ####   
  ###    
 #  ##   
###  ###

 _       
( (    /|
|  \  ( |
|   \ | |
| (\ \) |
| | \   |
| )  \  |
|/    )_)

   ____  
  / __ \ 
 | |  | |
 | |  | |
 | |__| |
  \___\_\

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.

Visit Preferences to set your user name
Summary of change:
MembersPage/JanSaenen Peppe's config and tables E30 325i turbo, EDIS: [http://www.vems.hu/files/MembersPage/MattiasSandgren/PeppeBmw/config.txt config.txt] and [http://www.vems.hu/files/MembersPage/MattiasSandgren/PeppeBmw/tables.txt tables.txt] Gergelys config and tables E30 325i turbo, stock: [http://quasar.dynaweb.hu/~lezsi/bmw/conversion/20050718105516.txt txt] The fuse problem is solved now and not a problem anymore. My rotor turned out to be smashed. After replacing that spark is still a problem: If i monitor the plug from cil 1: It has a great spark for about 4 times/turns and then just drops dead or really weak for a few turns and lights up again just as bright as in the beginning. It's the same for the other plugs. I guess that has to do with my megatune settings. '''Below is my new config and table''' * primep=0F * primep_temp_scaling=A0 * cwl=00 * cwh=00 * cranking_thres=02 * awev=00 * awev_temp_scaling=00 * awec=FF * warmup_clt_range[0]=00 * warmup_clt_range[1]=11 * warmup_clt_range[2]=25 * warmup_clt_range[3]=39 * warmup_clt_range[4]=50 * warmup_clt_range[5]=64 * warmup_clt_range[6]=78 * warmup_clt_range[7]=8C * warmup_clt_range[8]=AA * warmup_clt_range[9]=C8 * warmup_clt[0]=64 * warmup_clt[1]=64 * warmup_clt[2]=64 * warmup_clt[3]=64 * warmup_clt[4]=64 * warmup_clt[5]=64 * warmup_clt[6]=64 * warmup_clt[7]=64 * warmup_clt[8]=64 * warmup_clt[9]=64 * warmup_rpm_scale=DE * req_fuel=00 * divider=01 * alternate=15 * injopen=0D * battfac=10 * kpafac=7E * kpaoffs=72 * injocfuel=14 * injrampup_battfac=FF * injpwm=FF * injpwmt=0A * injpwm6=FF * rpmk[0]=02 * rpmk[1]=58 * tpsdot_kpadot_conf=00 * tpsdotrate[0]=05 * tpsdotrate[1]=14 * tpsdotrate[2]=28 * tpsdotrate[3]=4D * tpsaq[0]=02 * tpsaq[1]=04 * tpsaq[2]=05 * tpsaq[3]=0D * als_cut_mintps=FF * tpsasync=01 * acmult=64 * tpsacold=00 * launch_enrich=FF * launch_retard=FF * overrun_fuelcut=14 * overrun_fuelresume=13 * rev_limit=3C * airden_ignore=62 * config11=51 * config12=30 * config13=02 * batt_cal=A3 * fastidle=80 * als_max_cut=FF * dbaro=0C * tps_low=17 * tps_high=CE * fan_temp=55 * fan_hyst=09 * fan_channel=FF * iac_step_seq=D8 * iac_conf=78 * iac_max_steps=96 * iac_tps_thres=0D * iac_cold_idle_temp=BF * iac_warm_idle_temp=C6 * iac_cold_rpm=69 * iac_warm_rpm=64 * iac_cold_start_pos=99 * iac_warm_start_pos=73 * iac_afterstart_rpm=0A * iac_afterstart_duration=0A * iac_speed=00 * iac_kp=25 * iac_ki=1A * iac_kd=30 * launch_rpm=FF * iac_integral_limit_dec=0A * iac_integral_limit_inc=C8 * iac_integral_deadband=0A * iac_deadband=05 * als_cut_maxtps=FF * iac_overclose_interval=0A * iac_ref_pos[0]=99 * iac_ref_pos[1]=99 * iac_ref_pos[2]=99 * iac_ref_pos[3]=8F * iac_ref_pos[4]=87 * iac_ref_pos[5]=80 * iac_ref_pos[6]=80 * iac_ref_pos[7]=7A * iac_ref_pos[8]=78 * iac_ref_pos[9]=66 * iac_sol_channel=36 * iac_ign_slope=18 * softrpm_range=FF * iac_ign_advance_limit=10 * iac_ign_retard_limit=18 * iac_ign_threshold=03 * ego_conf=06 * ego_lag=01 * ego_coolant=00 * ego_maxtps=FF * ego_maxmap=FF * ego_minrpm=06 * ego_maxrpm=FF * ego_warmup=15 * ego_lean_limit=40 * ego_rich_limit=05 * ego_pid_kp=28 * als_enrich=FF * ego_delta=00 * ego_target=19 * ego_pid_window=FF * wbo2_warmup_ramp=9C * als_react_tps=FF * wbo2_abs_limit=E4 * wbo2_limit_maxt=A0 * wbo2_fallback=60 * wbo2_retry_t=06 * wbo2_edgetime_corr=BA * wbo2_edgetime_min=50 * wbo2_ri_target=96 * wbo2_nernstdc_target=9C * wbo2_pump_pw_zero=64 * wbo2_calibration=9B * wbo2_heater_pid_kp=45 * wbo2_heater_pid_ki=11 * wbo2_heater_pid_kd=1A * wbo2_heater_pid_ilimit=81 * wbo2_pump_pid_kp=15 * wbo2_pump_pid_ki=4E * wbo2_pump_pid_kd=00 * wbo2_pump_pid_ilimit=FF * wbo2_ri_confidence_scale=80 * knock_conf=00 * knock_sampling_window=FF * knock1_frequency=29 * knock1_gain=FF * knock1_integrator=FF * knock2_frequency=29 * knock2_gain=FF * knock2_integrator=FF * knock_threshold=FF * knock_noise_scale=FF * knock_max_retard=FF * knock_default_retard=00 * knock_retard_step=FF * knock_retard_delay=FF * knock_advance_step=FF * knock_advance_delay=FF * knock_minrpm=FF * knock_maxrpm=FF * ve_learn_coolant=48 * ve_learn_max_power=FF * ve_learn_rpm_scale=FF * ve_learn_kpa_scale=FF * ve_learn_ego_scale=FF * ve_learn_min_weight=01 * ve_learn_speed=FF * ve_learn_limit=21 * ve_learn_conf=01 * lcd_c0=FF * lcd_delay=11 * lcd_backlight=FF * kpa_conf=21 * ign_balance=00 * als_retard_mintps=FF * als_retard_maxtps=FF * lcd_default_view=00 * primary_trigger=01 * secondary_trigger=02 * tooth_wheel=3A * trigger_tooth=05 * another_trigger_tooth=14 * crank_minper=50 * tooth_wheel_twidth1=02 * tooth_wheel_twidth2=06 * cam_sync_r_edge_phase=FF * cam_sync_f_edge_phase=FF * reset_engphase_after=6E * ign_tdcdelay=6E * ign_dwell14=1F * ign_dwell6=20 * ign_crank_advance=14 * ign_out=70 * ignchmax=05 * engine_off_delay=08 * pump_on_mintime=08 * fuelpump_channel=57 * inj_stage2_rate=FF * inj_stage2_start_tps=FF * inj_stage2_start_map=FF * als_deact_rpm=FF * als_deact_time=00 * als_deact_egt=00 * als_retard=FF * als_rev_limit=64 * misc1out_minrpm=FF * misc1out_maxrpm=FF * misc1out_mintps=FF * misc1out_maxtps=FF * misc1out_minmap=FF * misc1out_maxmap=FF * misc1out_channel=FF * misc2out_minrpm=FF * misc2out_maxrpm=FF * misc2out_mintps=FF * misc2out_maxtps=FF * misc2out_minmap=FF * misc2out_maxmap=FF * misc2out_channel=FF * act_wot_rpm=FF * act_wot_channel=36 * act_rpm_rpm=FF * act_rpm_channel=FF * egt1_cal=49 * als_tks_channel=FF * boost_conf=00 * boost_targetoffs=00 * boost_minpressure=FF * boost_pid_kp=20 * boost_pid_ki=80 * boost_pid_kd=01 * boost_pid_ilimit=FF * boost_channel=FF * water_pump_temp=00 * hybrid_rpm_a=00 * hybrid_rpm_m=00 * water_pump_hyst=00 * water_pump_channel=FF * toothrel_normal=B5 * toothrel_missing=76 * fuelcut_min_kpa=0E * fuelcut_max_kpa=FF * tach_channel=FF * tach_divider=FF * shiftcut_conf=7F * shiftcut_channel=66 * shiftcut_time=7F * softrpm_rpm=FF * j[0]=3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 * j[1]=3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 * j[2]=3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 * j[3]=3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 * j[4]=3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 * j[5]=3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 * j[6]=3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 * j[7]=3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 * j[8]=3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 * j[9]=3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 * j[A]=3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 * j[B]=3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 3280 * l[0]=37 37 37 37 37 37 37 37 37 37 37 37 * l[1]=37 37 37 37 37 37 37 37 37 37 37 37 * l[2]=37 37 37 37 37 37 37 37 37 37 37 37 * l[3]=37 37 37 37 37 37 37 37 37 37 37 37 * l[4]=37 37 37 37 37 37 37 37 37 37 37 37 * l[5]=37 37 37 37 37 37 37 37 37 37 37 37 * l[6]=37 37 37 37 37 37 37 37 37 37 37 37 * l[7]=37 37 37 37 37 37 37 37 37 37 37 37 * l[8]=37 37 37 37 37 37 37 37 37 37 37 37 * l[9]=37 37 37 37 37 37 37 37 37 37 37 37 * l[A]=37 37 37 37 37 37 37 37 37 37 37 37 * l[B]=37 37 37 37 37 37 37 37 37 37 37 37 * n[0]=44 44 50 50 64 64 78 78 78 24 28 50 * n[1]=44 44 50 50 64 64 78 78 78 28 2C 50 * n[2]=44 44 50 50 64 64 78 78 78 2C 30 50 * n[3]=44 44 50 50 64 64 78 78 78 30 34 50 * n[4]=44 44 50 50 64 64 78 78 78 34 38 50 * n[5]=44 44 50 50 64 64 78 78 78 38 3C 50 * n[6]=44 44 50 50 64 64 84 84 84 3C 3F 50 * n[7]=3C 50 50 50 64 64 78 78 78 3F 3C 50 * n[8]=28 50 50 50 64 64 78 78 78 3A 3C 50 * n[9]=28 50 50 50 64 64 78 78 78 3A 3C 50 * n[A]=3C 50 50 50 64 64 78 78 78 3A 3C 50 * n[B]=3C 48 50 50 64 64 78 78 78 01 02 04 * k[0]=14 1E 23 2D 32 3C 41 46 50 55 5F 64 * r[0]=06 0B 10 16 1C 22 28 2E 34 3A 40 46 * h[0]=08 02 20 04 10 01 40 80 * h[1]=01 01 01 01 01 01 01 01 * h[2]=00 00 00 00 00 00 00 00 * b[0]=40 48 50 58 60 FF FF FF FF 20 40 60 * t[0]=80 A0 C0 E0 FF FF FF FF '''Previous remarks''' *alternate=05 # 6 cylinder, right ? *injopen=1F # '''use injopen=00 ''' *injocfuel=04 # '''use injocfuel= 14 .. 32 : that is 480 .. 1200 usec''' *'''ign_dwell6=20''' # too high and blows ignfuse during cranking ? Likely ign_dwell6=20 is way too high (so dwell becomes too long with low VBatt during cranking) That is unlikely to be intentional. See GenBoard/Manual/DigitalOut/Table
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.