##  ##  
 ##  ##  
 ##  ##  
 ##  ##  
  #####  
         

         
     ##  
         
     ##  
     ##  
     ##  
     ##  
  ####   

    #    
 ######  
   ##    
   ##    
   ##    
   ## #  
    ##   
         

______ 
|  _  \
| | | |
| | | |
| |/ / 
|___/  
       
       

         
         
 ######  
    ##   
   ##    
  ##     
 ######  
         

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
I recieved my Genboard3.1, all in pieces. *1 Genboard PCB *8 FET's - 6 injectors, 1 WBO2, +extra *4 IGBT's - 3 ignition banks, +extra *1 MAP sensor *1 Bag of bits labeled RESC1 (don't know what those are for yet) *1 Bag of bits labeled RESC2 (don't know what those are for either) GenBoard/VerThree/RescueKit I'm planning on removing the stock ECU entirely if possible and making a custom connector running between the stock harness connector and the genboard connectors, to keep a clean look. I've traced all of the wires i'll need to the stock ECU. //T68 is the ECU plug, GB36 & GB18 are the Genboard connectors// I'll fill in this list as I figure them out. If anyone wants to help complete the list, feel free. *Air Temp - T68-36 BL/G to GB36-2 *Coolant Temp - T68-14 BL to GB36-14 *TPS Signal - T68-40 G/W to GB36-1 *TPS 5v Ref - T68-41 BK/GY to GB36-28 *IACV (fast idle) - T68-27 R/BL or 53 BK/W to GB36-3 *Speed Sensor - T68-44 W/R and T68-68 G to GB? (VSS - Vehicle speed sensor? Not needed.) *Hall Sensor - T68-44 W/R to GB36-27 *Injectors **C1 T68-24 GY to GB36-7 INJA(Really any of INJ[A..H]) **C2 T68-24 GY to GB36-19 INJB **C3 T68-24 GY to GB36-8 INJC **C4 T68-24 GY to GB36-20 INJD **C5 T68-24 GY to GB36-9 INJE **C6 T68-24 GY to GB36-18 INJF *Coil **Bank1 - T68-8 BK/BR to GB36-35 DRIVE_00 **Bank2 - T68-67 R to GB36-33 DRIVE_01 **Bank3 - T68-68 G to GB36-34 DRIVE_06
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.