_______ 
(  ____ \
| (    \/
| |      
| | ____ 
| | \_  )
| (___) |
(_______)
         

         
         
 #####   
 ##  ##  
 ##  ##  
 #####   
 ##      
 ##      

 _____ 
(_   _)
  | |  
  | |  
  | |  
  (_)  
       
       

         
         
  ####   
     ##  
  #####  
 ##  ##  
  #####  
         

         
         
 ##  ##  
 ####### 
 ####### 
 ## # ## 
 ##   ## 
         

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
= Calibra C20XE 350hp+ on Ethanol = This is one of my preferred cars that I use for trips and some TrackDays. It is almost stock and will start upgrading for 350hp+ I've just finished internal engine upgrades and will install VEMS on it. http://guilhermemonteiro.com/calibra/Calibra.jpg This car has a cam sync and I will try to use every already deployed sensors (not sure about MAF yet). ---- == Engine upgrade == *Engine code: C20XE **Forged pistons (Mahle) **Stage I head modifications ***enlarged and polished intake and exhaust runners ***reshaped valve guide bosses **9.5:1 compression ratio (down 1.0 for turbocharge) **Oil cooler: B&M *TurboCharger **Not decided yet. Probably a Garrett ballbearing GT2860, not decided on A/R too. Have been thinking about a Lysholm compressor too. **Custom exhaust manifold **Custom Intercooler **3" aluminum intake **4" Downpipe *Ignition **standard coils (Wasted Spark setup) ***maybe COP in the future, from a Fiat Marea. They fit perfectly between spark plugs and spark cover. *Fuel: Ethanol only *Fuel Delivery **8 Bosch injectors **2 Bosch fuel pumps at 3.2 bar (can handle 12 bar each) == Targets == *revs up to 6.500rpm and cutting at 7.000rpm *300 to 350hp (has much more potential) == Engine Management == It will be an Assembled GenBoard 3 controller with: *4+4 ignition drivers *NO 1 wire interface, to save one input *Knock and EGT I will use dual EGT, being the first one for logging, boostcut and lambdatarget enrichment and the second one for logging only. *LCD connection *NO PS2 connection, so I can use speedsensor *EC26/27 VR primary trigger (60-2 VR crank for all Opel/Vauxhall/Chevolet/Holden C20 engines I guess) *HALL secondary trigger ---- == Order info == * '''Assembled v3.6 controller''' ** 30V flyback ** NO 1-wire interface ** 4+4 ignition drivers (will use Wasted Spark first and COP later) ** Knock and 2 EGT ** LCD connection ** MAP connection 400kPa (6/4mm pneumatic) ** mounting-style: screws ** primary_trigger: EC36/27 VR ** NO PS2 connection ** secondary_trigger: HALL * '''v3harness''' ** injectors: "V8" (will use 2 small injectors per cylinder) ** with_relays: yes * '''EGT sensor''' (K-type) ** with_connector pair ** Size 6mm ** fitting_only: no ** with back panel option * Other items ** green LCD cased ** 3m of Pneumatic tube (temperature 180C) ** 2 x Pneumatic connectors (VIV6464) ** Wideband O2 sensor ** Wideband screw ** Oil Pressure Sensor
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.