####   
 #    #  
 #    #  
 #    #  
  ####   
         

         
         
 # ###   
 ##   #  
 #       
 #       
 #       
         

         
         
  ###    
     #   
  ####   
 #   #   
  ### #  
         

 _____ 
|_   _|
  | |  
  | |  
 _| |_ 
 \___/ 
       
       

 ___   
|  _`\ 
| (_) )
| ,  / 
| |\ \ 
(_) (_)
       
       

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
Issue Report: * firmware 1.0.23 as downloaded from filethingie with minimal changes ** minimal changes ?? like ? Trigger 60-2 VR 4 clyn Testing 8 IGN & 8 INJ outputs prior to installation set with MegaTune mt-027 and 1.0.23 (precompiled) vems.ini INJ setup h0[ 1 2 4 8 16 32 64 128 ] (binary) firing banks [0..7] IGN setup 07..00 DUMMY h2[00 01 02 03 04 05 06 07] ''ISSUE'' for 4 clyn setup. Below 1500 RPM only 2 of the 8 IGN outputs fire 7,6 I believe.. can confirm with wire check but above 1500 RPM all 8 fire for 8clyn setup Nothing else changed below 2880 RPM only 2 IGN outputs fire above 2880 RPM all 8 ign outputs fire requested command results RPM:2881 W02S35I00 68 +40 c0000 i0000 clt: 76C adv:26 0329 iac:000 000 mdv result Sat Oct 29 01:51:52 CEST 2005<0> mdV result 1.0.23<0> mll result RPM:1500 T 76 P041 La:1.00 egoC:+40 clt: 76C tps:20% 0317 egt:0000 147 00 '''Table Dump''' <code> j[0]=0F7F 0F7F 157F 187F 177F 187F 177F 1A7F 197F 177F 177F 1A7F j[1]=117F 117F 167F 187F 177F 187F 1C7F 227F 217F 237F 217F 267F j[2]=157F 167F 147F 187F 1A7F 1F7F 267F 2B7F 2D7F 2F7F 317F 357F j[3]=297F 257F 257F 227F 247F 2A7F 2F7F 357F 357F 377F 387F 3B7F j[4]=3B7F 377F 347F 327F 327F 367F 3A7F 3D7F 3E7F 3F7F 3E7F 417F j[5]=3E7F 3E7F 3C7F 3B7F 3A7F 3A7F 3C7F 3E7F 407F 407F 407F 427F j[6]=467F 467F 457F 467F 447F 437F 437F 447F 447F 457F 457F 497F j[7]=4F7F 4D7F 4E7F 507F 4D7F 4B7F 4B7F 4B7F 4C7F 4C7F 4B7F 4E7F j[8]=647F 5C7F 5F7F 5B7F 597F 577F 537F 527F 527F 517F 517F 527F j[9]=647F 627F 5F7F 5C7F 5C7F 5B7F 5A7F 587F 587F 577F 567F 577F j[A]=6D7F 6B7F 6B7F 687F 647F 607F 607F 5F7F 5F7F 5D7F 5C7F 5C7F j[B]=797F 787F 767F 777F 757F 747F 707F 737F 767F 747F 747F 767F l[0]=45 38 38 38 38 38 38 38 38 38 38 38 l[1]=38 38 38 38 38 38 38 38 38 38 38 38 l[2]=38 38 41 47 4F 4F 4F 4F 4F 4F 4F 4F l[3]=45 45 4F 59 59 59 59 59 59 59 59 59 l[4]=6A 6A 6A 6A 6A 6A 6A 6A 6A 6A 6A 6A l[5]=77 77 77 77 77 77 77 77 77 77 77 77 l[6]=85 85 85 85 85 85 85 85 85 85 85 85 l[7]=94 94 94 94 94 94 94 94 94 94 94 94 l[8]=94 94 94 94 94 94 94 94 94 94 94 94 l[9]=94 94 94 94 94 94 94 94 94 94 94 94 l[A]=94 94 94 94 94 94 94 94 94 94 94 94 l[B]=94 94 94 94 94 94 94 94 94 94 94 94 n[0]=47 43 74 74 74 74 78 7E 89 8C 8C 8C n[1]=45 43 74 74 74 76 77 7D 88 8C 8C 8C n[2]=44 A0 79 78 78 78 78 78 84 8C 8C 8C n[3]=71 73 73 76 76 76 76 76 76 76 76 76 n[4]=6C 6C 6C 6C 6C 6C 6C 6C 6C 6C 6C 6C n[5]=5B 5B 5B 5B 5B 5B 5B 5B 5B 5B 5B 5B n[6]=50 50 50 50 50 48 48 48 48 48 48 48 n[7]=50 50 50 50 50 48 40 40 40 40 40 40 n[8]=50 50 50 50 50 48 40 40 40 40 40 40 n[9]=50 50 50 50 50 48 40 40 40 40 40 40 n[A]=40 40 40 40 40 40 40 40 40 40 40 40 n[B]=40 40 40 40 40 40 40 40 40 40 40 40 k[0]=05 0F 19 23 2D 37 41 4B 5A 69 7D 96 r[0]=06 0A 0F 14 19 1E 23 29 2D 33 3D 47 h[0]=01 02 04 08 10 20 40 FF h[1]=FF 00 00 00 00 00 00 00 h[2]=00 01 02 03 04 05 06 07 b[0]=FF FF FF FF FF FF FF FF FF FF FF FF t[0]=FF FF FF FF FF FF FF FF ** Config dump ** primep=14 primep_temp_scaling=60 cwl=9D cwh=33 cranking_thres=00 awev=26 awev_temp_scaling=90 awc=FF warmup_clt_range[0]=00 warmup_clt_range[1]=15 warmup_clt_range[2]=28 warmup_clt_range[3]=3C warmup_clt_range[4]=50 warmup_clt_range[5]=64 warmup_clt_range[6]=78 warmup_clt_range[7]=8C warmup_clt_range[8]=AA warmup_clt_range[9]=C8 warmup_clt[0]=C0 warmup_clt[1]=B4 warmup_clt[2]=AB warmup_clt[3]=A8 warmup_clt[4]=A0 warmup_clt[5]=9A warmup_clt[6]=8C warmup_clt[7]=7F warmup_clt[8]=73 warmup_clt[9]=64 warmup_rpm_scale=DD req_fuel=64 divider=02 alternate=17 injopen=20 battfac=10 kpafac=34 kpaoffs=80 injocfuel=08 injrampup_battfac=FF injpwm=38 injpwmt=08 injpwm6=20 rpmk[0]=0B rpmk[1]=B8 tpsdot_kpadot_conf=00 tpsdotrate[0]=05 tpsdotrate[1]=0E tpsdotrate[2]=20 tpsdotrate[3]=40 tpsaq[0]=08 tpsaq[1]=12 tpsaq[2]=17 tpsaq[3]=1B tps_thresh=05 tpsasync=02 acmult=64 tpsacold=05 tpsdq=64 decel_fuelcut_thres=FF overrun_fuelcut=07 overrun_fuelresume=06 rev_limit=55 airden_ignore=62 config11=30 config12=30 config13=02 batt_cal=A3 fastidle=80 baro=64 dbaro=0C tps_low=00 tps_high=FF fan_temp=55 fan_hyst=09 fan_channel=FF iac_step_seq=C9 iac_conf=C9 iac_max_steps=FF iac_tps_thres=05 iac_cold_idle_temp=A0 iac_warm_idle_temp=D0 iac_cold_rpm=74 iac_warm_rpm=67 iac_cold_start_pos=E2 iac_warm_start_pos=B0 iac_afterstart_rpm=1F iac_afterstart_duration=20 iac_afterstart_steps=04 iac_kp=25 iac_ki=10 iac_kd=30 iac_integral_speed=C0 iac_integral_limit_dec=05 iac_integral_limit_inc=E0 iac_integral_deadband=0A iac_deadband=05 iac_pid_conf=01 iac_overclose_interval=B8 iac_ref_pos[0]=35 iac_ref_pos[1]=34 iac_ref_pos[2]=33 iac_ref_pos[3]=32 iac_ref_pos[4]=31 iac_ref_pos[5]=30 iac_ref_pos[6]=2F iac_ref_pos[7]=2E iac_ref_pos[8]=2D iac_ref_pos[9]=2C iac_sol_channel=77 iac_ign_advance_change=28 iac_ign_retard_change=20 iac_ign_advance_limit=10 iac_ign_retard_limit=18 iac_ign_threshold=08 ego_conf=07 ego_lag=04 ego_coolant=00 ego_maxtps=FF ego_maxmap=FF ego_minrpm=04 ego_maxrpm=FF ego_warmup=3C ego_lean_limit=1D ego_rich_limit=28 ego_pid_kp=40 mt_unused=00 ego_delta=01 ego_target=19 ego_pid_window=FF wbo2_warmup_ramp=A0 wbo2_warmup_target=FF wbo2_abs_limit=E4 wbo2_limit_maxt=A0 wbo2_fallback=60 wbo2_retry_t=06 wbo2_edgetime_corr=BA wbo2_edgetime_min=50 wbo2_ri_target=A1 wbo2_nernstdc_target=A0 wbo2_pump_pw_zero=E7 wbo2_calibration=64 wbo2_heater_pid_kp=46 wbo2_heater_pid_ki=10 wbo2_heater_pid_kd=1A wbo2_heater_pid_ilimit=A0 wbo2_pump_pid_kp=30 wbo2_pump_pid_ki=01 wbo2_pump_pid_kd=00 wbo2_pump_pid_ilimit=E0 wbo2_ri_confidence_scale=80 knock_conf=01 knock_sampling_window=F2 knock1_frequency=29 knock1_gain=40 knock1_integrator=14 knock2_frequency=29 knock2_gain=40 knock2_integrator=14 knock_threshold=FF knock_noise_scale=D8 knock_max_retard=28 knock_default_retard=04 knock_retard_step=08 knock_retard_delay=FF knock_advance_step=FF knock_advance_delay=50 knock_minrpm=FF knock_maxrpm=05 ve_learn_coolant=D8 ve_learn_max_power=FF ve_learn_rpm_scale=1E ve_learn_kpa_scale=1E ve_learn_ego_scale=43 ve_learn_min_weight=4D ve_learn_speed=FF ve_learn_limit=FF ve_learn_conf=00 lcd_c0=FE lcd_delay=FF lcd_backlight=FF lcd_offs[0]=FF lcd_offs[1]=FF lcd_offs[2]=FF lcd_offs[3]=FF lcd_default_view=00 primary_trigger=01 secondary_trigger=02 tooth_wheel=3A trigger_tooth=01 another_trigger_tooth=1E crank_minper=50 tooth_wheel_twidth1=06 tooth_wheel_twidth2=0C cam_sync_r_edge_phase=FF cam_sync_f_edge_phase=FF reset_engphase_after=00 ign_tdcdelay=78 ign_dwell14=2F ign_dwell6=6F ign_crank_advance=2E ign_out=70 ignchmax=07 engine_off_delay=08 pump_on_mintime=10 fuelpump_channel=57 inj_stage2_rate=FF inj_stage2_start_tps=FF inj_stage2_start_map=FF als_lowrpm=FF als_maxtps=FF als_ignretard=FF als_rich=FF als_rev_limit=06 misc1out_minrpm=19 misc1out_maxrpm=20 misc1out_mintps=FF misc1out_maxtps=50 misc1out_minmap=FF misc1out_maxmap=FF misc1out_channel=FF misc2out_minrpm=FF misc2out_maxrpm=FF misc2out_mintps=FF misc2out_maxtps=FF misc2out_minmap=FF misc2out_maxmap=FF misc2out_channel=FF act_wot_rpm=26 act_wot_channel=FF act_rpm_rpm=FF act_rpm_channel=40 egt1_cal=00 egt1_offs=00 boost_conf=00 boost_targetoffs=FF boost_minpressure=20 boost_pid_kp=80 boost_pid_ki=01 boost_pid_kd=FF boost_pid_ilimit=FF boost_channel=08 water_pump_temp=00 hybrid_rpm_a=00 hybrid_rpm_m=00 water_pump_hyst=FF water_pump_channel=7F toothrel_normal=66 toothrel_missing=7F fuelcut_min_kpa=14 fuelcut_max_kpa=66 tach_channel=7F tach_divider=66 shiftcut_conf=7F shiftcut_channel=67 shiftcut_time=7F </code> * fix the config: ** boost_channel=08 is invalid ** ... channel=7F is valid, but use FF (i7 in MegaTune) if disabled * check the inputtrigger polarity. I suspect reversed VR, that is a common mistake, and it often does not show up immediately, but at higher RPM like your symptoms. * InputTrigger/TriggerLog * check the wheel error counter, is it increasing ? ** mlp01 (LCD page 01, or keep it dumped with mdk01 mdf01 ) if W.. increases that indicates wheel error
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.