##  ##  
  ####   
   ##    
  ####   
 ##  ##  
         

  ###    
   ##    
   ##    
   ##    
   ##    
   ##    
  ####   
         

       
/'\_/`\
|     |
| (_) |
| | | |
(_) (_)
       
       

   ____ 
  / ___|
 | |    
 | |___ 
  \____|
        

 ______  
(  __  \ 
| (  \  )
| |   ) |
| |   | |
| |   ) |
| (__/  )
(______/ 
         

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
'''LANCIA DELTA INTEGRALE HF 16V''' rallycross cars. *2L engine *4 Cyl *turbo *36-1 toothweel with VR trigger *wasted spark coil *4 bar MAP sensor, about 1,7-1,8 bar boost *permanently opened throttle body for ALS There are 2 cars here, they are almost the same, except one of them has high impedance injectors, and the other have low impedance injectors. The cars was running succesfully from a year with VEMS, and with 1.0.38 firmware, everything was OK. They use start limiter and boost control too. Now the cars came back. They need ALS. I uploaded the prereleased 1.1.7 firmware into one of them. Here are the config files: [http://www.vems.hu/files/Fero/Lancia/config.txt config.txt] [http://www.vems.hu/files/Fero/Lancia/tables.txt tables.txt] [http://www.vems.hu/files/Fero/Lancia/Lancia_SZABI_04.msq lancia.msq] ALS works almost perfect, but i realised some minor problems. We need an ignition cut gauge in megatune to easy tuning, and also we should take into the log the actual ign cut. Hungarian: Szerintem 0 foktól kellene megadni a retard értékét mert ha be van kapcsolva az ALS kapcsoló és elértük az idõlimitet akkor az alapjáratot a soft ign cut limiterrel tartja a kocsi, ekkor a gyakorlatban jólmûködõ ALS beállítások mellett még mindig retardolja a gyújtást a vezérlõegység, amire semmi szükségünk nincs. Nekünk csak a negatív gyújtástratomány a lényeges, és 0-tól nyugodtan válthatunk azonnal a táblázatban szereplõ gyújtásértékre. Here is a log file, you can see that the spark retard and the fuel enrichment works good in the 1.17 firmware: [http://www.vems.hu/files/Fero/Lancia/log5.xls ALS log] ----------------------------------------- I have a problem. One of the 2 same cars don't want to start with the 1.1.8 firmware. There aren't RPM signal. I removed allthe spark plugs, so no accelerations and decelerations on the carnk. There are stable RPM with the old 1.0.38 firmware, but the isn't with the new 1.1.8 firmware. I made trigger logs with the 1.1.8 firmware. Here are the files: [http://www.vems.hu/files/Fero/Lancia/configFeri.txt config] [http://www.vems.hu/files/Fero/Lancia/tablesFeri.txt tables] [http://www.vems.hu/files/Fero/Lancia/trigger4.bin.txt triggerlog_bin] [http://www.vems.hu/files/Fero/Lancia/trigger4.txt triggerlog_txt] What could be the proble? The other car works like a charm, but this car doesn't. Mayba i have to change the triggerwheel?
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.