##  ##  
 ##  ##  
 ##  ##  
  ####   
   ##    
         

 _______ 
(_____  )
     /'/'
   /'/'  
 /'/'___ 
(_______)
         
         

         
         
  ####   
 ##  ##  
 ##  ##  
 ##  ##  
  ####   
         

         
         
  ####   
 ##  ##  
 ##  ##  
 ##  ##  
  ####   
         

         
### ###  
 ##  ##  
 ##  ##  
 ##  ##  
 ##  ##  
  ### ## 
         

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
Hello, Welcome to the Delft University of Technology Racing Team memberspage. http://www.dutracing.nl/images/stories/easygallery/92/1185186947_endurance2.jpg We are a Formula Student Recing team. We compete in the UK and Germany events and we are also present at the Baltic Open event. We are known to build the lightest car in the competition. We were weighed @ 125,5 kg in the UK in 2006. We are investigating in the VEMS system to use it in the future instead of the MoTeC system. We are working on a Traction and Launch control system with four wheel speed sensors on the VEMS or with an external system communicating with the VEMS. Chassis: Full carbon monoocoque Engine: Yamaha wr450 one cylinder. 5 valve cyl head Power output currently 55 hp with 20 mm restrictor Current manamgement system: MoTeC M4 36-1 trigger wheel with v/r sensor 1 injector aimed @ the intake valves Coil on plug ignition coil 5 bar fuel pressure have a look @ www.dutracing.nl Best result so far: 2rd overall in the Formula Student UK event. (www.formulastudent.co.uk) We have a problem with the trigger wheel. It is a 36-1 trigger wheel that worked fine with MoTeC. The RPM reading is too high (700 instead of 550). We cannot check the timing at the moment. I do not have the configuration file, because the dyno-pc does not have an internet connection. I have the following settings in megatune: Rising edge, Multitooth, Filtering disabled, Advanced filtering disabled, Special N-1 ENABLED, Number of teeth on wheel: 35 Trigger tooth: 1 Next trigger tooth: 0 Crank min period: 768 us The timings percentages are as in the help, 75-150 and 150-250 IIRC
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.