##### ## #### ## #####
## ## ####### ## # ## ## ## ## ##
##### ## ## ## ## ## ## ## ##
###### ## ## ## ## ##### ## ####
### ## ## ##### ## ## ## ## ######
IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now. Visit Preferences to set your user name Summary of change: You can use that method( [http://www.vems.hu/wiki/index.php?page=MembersPage%2FDamirMuha%2FBoostDependingGear GEAR dependant boost contro] for N20 controlling(if you have PWM value for nitro). You can use N20 settings. http://www.vems.hu/files/DamirMuha/1.1.66/nitro12.png for enabling relay that give power to solenoid only when button for N20 is pressed(nitro button connect to analog ch 7). Wizzard of NOS recommend 50Hz for solenoid, but 61Hz is good. For retarding spark, depending on engine and amount of nitro. Good starting point is to remove 2deg of ignition for every 20HP of nitro for 1 liter of engine. So if you have 100HP nitro shoot and 2liter engine you need to remove about 5deg of ignition(2*(100HP/(20HP*2 liter)). It's recommanded to check if engine knocks and go to dyno. Schematic: http://www.vems.hu/files/DamirMuha/1.1.66/nitro15.jpg Example of table for fwd car with lot of nitro: http://www.vems.hu/files/DamirMuha/1.1.66/nitro11.png Amount of nitro for that car limited by traction in lower gears and with max of torque, so at lower rpm engine can suffer less nitro. Optional: Add document to category: Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.