_     _ 
( )   ( )
`\`\_/'/'
  `\ /'  
   | |   
   (_)   
         
         

      #  
      #  
  ### #  
 #   ##  
 #    #  
 #   ##  
  ### #  
         

         
#### ### 
 ##   #  
 ##   #  
  ## #   
  ###    
   ##    
         

 ___   
(  _`\ 
| | ) |
| | | )
| |_) |
(____/'
       
       

   ##    
         
  ###    
   ##    
   ##    
   ##    
  ####   
         

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
A special subpage with primairy trigger information. Sensor info: * VR type * partnumber GM 90451441 * Pin1 color brown/black * Pin2 color brown/red * Pin3 color black (cable shield) * Sensor resistance = 517 Ohm DVM reads positive voltage when metal object is moving towards sensor. And negative voltage when metal object is moving away from sensor, so: * Red DVM wire to VR sensor pin 1 => connect to EC36pin27 (VR+) * black DVM wire to VR sensor pin 2 => connect to EC36pin26 (VR-, GND) If VR sensor Pin1 is connected to EC36pin26 (and VR sensor Pin2 is connected to EC36pin27) than reverse the connection. Wheel info: * 60-2 type * partnumber GM 90 265 094 * Tooth 19 (0x13) = Cyl 1&4 @ TDC (Taking into account that the first tooth after gap is tooth 0. And crank is turning clockwise. (verified it)) * tooth_wheel=3A * trigger_tooth=0A, this is 11 teeth before cyl 1&4 tdc leaving you with the remainder of around 60-66 degrees btdc after the trigger (ign_tdcdelay=84 -> 66 degrees in 0.5 crank degree resolution) '''Please explain me why tooth 0A is eleven theeth before tdc if tooth 13 is tdc?''' * ign_tdcdelay=84 * another_trigger_tooth=1E * crank_minper=50 * tooth_wheel_twidth1=06 * tooth_wheel_twidth2=?? '''Is this 2x6=12 degrees?''' * pictures: http://members.chello.nl/~b.rieken/Turbo/00001small.jpg http://members.chello.nl/~b.rieken/Turbo/00003small.jpg Standard GM wheel. Should be perfect.
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.