####   
     ##  
  #####  
 ##  ##  
  #####  
         

         
         
 ######  
     #   
   ##    
  #      
 ######  
         

     _    
    / \   
   / _ \  
  / ___ \ 
 /_/   \_\
          

   ____  
  / __ \ 
 | |  | |
 | |  | |
 | |__| |
  \____/ 
         
         

         
    ##   
         
    ##   
    ##   
    ##   
    ##   
 ####    

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
===== POWER ===== See FSM page {{EF&EC - 80}} for wiring diagram. (ECCS = ECU in Nissan CA18DET terminology) :Original ::The ignitions switch goes into the ECU, there it activates a low-side switch, which operates the ECCS relay. The ECCS relay supplies the actual 12V power to the (rest of the) ECU. || ||color||function|| ||ECU pin 16||R/B||switches on/off the ECCS relay|| ||ECU pins 49,59,109||B/W|| ECU power supply|| ||ECU pin 45||B/R|| Ingition switch, ign. on: 12V|| :VEMS ::VEMS has no provisions for this mechanism, it just needs its switched 12V, the end. We need to add this simple switching circuit ourselves, like this. All that is needed really, is a switching transistor. ::http://gtlamateurfest.uw.hu/nissan/2013-01-CAS-oscope/VemsPower.jpg ::This is a quick and easy way to adapt one system to the other. Probably not the best one, but certainly better than powering VEMS from the Ign.Switch signal directly. ::For now, I'll just solder this directly into the wiring, cover all leads in heatshrink, and then ducttape the whole thing. DIYFTW! :) ::(Maybe a capacitor for filtering Ign. switch bounce? Gate resistor if a FET is used? '''TBC'''). * NPN (BC817 or similar with a 2k .. 2k7 base resistor) is usually better for such things. Less sensitive than FET (which can be killed more easily, and badly needs Rgs). ** Flyback is a good idea in any case (eg. 1n4007 diode across coil, with cathode on coil+. Some suitable diode is included in rescue kit) * Second idea for power... just because I have everything lying around for this. ::http://gtlamateurfest.uw.hu/nissan/2013-01-CAS-oscope/VemsPower2.jpg
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.