_______ 
 |__   __|
    | |   
    | |   
    | |   
    |_|   
          
          

         
         
 ##  ##  
 ##  ##  
 ##  ##  
 ##  ##  
  #####  
         

         
         
  ### #  
 #   ##  
 #   ##  
  ### #  
      #  
  ####   

         
         
  ####   
 ##      
 ##      
 ##      
  ####   
         

         
  #####  
 ##  ##  
 ##      
 ##      
 ##   #  
  ####   
         

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
'''Auditrigger research''' Here I'm going to add info about som auditrigger research I have made. The so called 135 trigger system or (c270). At first a began to look at this picture. http://www.sjmautotechnik.com/trouble_shooting/wave/RPMTDCId.jpg I then realize the home trigger have a frequency which is half of the primary trigger. That means if you superimpose the home signal over cranksignal you should in theory get a 135-2 triggersignal. Small other things to notice: 1. Original home signal is inverted to crank-signal. Possibly for superimposing signals. 2. Same type of signal has been seen on Toyota 24/2 Distributor also with inverted "home" signal. 3. Small interference between crank and homesignal is no longer an object for filtering since they are merged. I also find a schematic over a Motronic system from a Porsche with have a similar system (no Cam-trigger). I copy the input circuit to pspice and began to simulate signals and as an output I got a 135-2 signal. I will describe this better later on. I also have made prototypcard with components to test in a real car. More info to come. Porsche motronic schematic: http://www.vems.hu/files/MembersPage/MagnusKarlstrom/Motronic/ML31AUS.pdf http://www.vems.hu/files/MembersPage/MagnusKarlstrom/Motronic/ML31DUS.pdf '''VR trigger problem''' Yesterday I was away on a quest for a car that encounters triggerproblems. When I hook up the oscilloscope on the trigger signal a found this: http://www.backeliten.net/trigger/VolvoV70problem3.bmp And here is one for the missing tooth: http://www.backeliten.net/trigger/VolvoV70problem.bmp This is 60-2 trigger and at the time the picture was taken the oscilloskop was directly connected to the VR trigger and no other electrical equipment was connected to the engine. So my question is why is there so much noise on the signal? I also figured that the signal got cleaner when the engine was inbetween two compression storkes. That means lower work for the starter. Here you can see the part which the signal is cleaner: http://www.backeliten.net/trigger/VolvoV70problem2.bmp Could it be the starter that is faulty? The starter was now changed, but no luck, there is still lot of noise on the VR-signal. Does anybode encountered the same problem? Answer: I had very similar problem once. With auditrigger. Yes it was starter. But what is physics under this - I don't knew! Someone else? GintsK
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.